Difference between revisions of "0.91inch IIC OLED Module SSD1306 SKU:MC091GX"

From LCD wiki
Jump to: navigation, search
(Created page with "{{lan | cn=http://www.lcdwiki.com/zh/0.91inch_IIC_OLED_Module_SSD1306_SKU:MC091GX | en=http://www.lcdwiki.com/0.91inch_IIC_OLED_Module_SSD1306_SKU:MC091GX }} == <fo...")
 
(→‎Interface Definition)
 
(13 intermediate revisions by one other user not shown)
Line 7: Line 7:
  
 
== <font color="blue">Product Picture</font> ==
 
== <font color="blue">Product Picture</font> ==
−
[[File:MRB3503-004.jpg|300px]] [[File:MRB3503-003.jpg|300px]] [[File:MRB3503-002.jpg|300px]]
+
[[File:0.91-OLED-main.jpg|400px]][[File:0.91-OLED-2pin.jpg|400px]][[File:0.91-OLED-4pin-2.jpg|400px]]
  
 
==<font color="blue">Product Description</font> ==
 
==<font color="blue">Product Description</font> ==
  
−
* 3.5-inch color screen, support 16BIT RGB 65K color display, display rich colors
+
*0.91 inch OLED screen with black and white or black and blue color display
−
* 320x480 resolution for clear display  
+
*128x32 resolution for clear display and high contrast
−
* 16-bit parallel bus transmission for fast transfer speed
+
*Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
−
* Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
+
*Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
−
* Support for touch function
+
*With IIC bus, only a few IOs can be used to light up the display
−
* Support SD card function expansion
+
*Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
−
* Provides a rich sample program for STM32 and C51 platforms
+
*Military-grade process standards, long-term stable work
−
* Military-grade process standards, long-term stable work
+
*Provides a rich sample program for STM32, C51, Arduino, and Raspberry Pi platforms
−
* Provide underlying driver technical support
+
*Provide underlying driver technical support
  
 
==<font color="blue">Product Parameters</font> ==
 
==<font color="blue">Product Parameters</font> ==
−
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
+
{| class="wikitable" border="1" style="width: 500px; background-color: white;"
 
| align="center" |Name
 
| align="center" |Name
 
| align="center" |Parameter
 
| align="center" |Parameter
 
|-
 
|-
 
| align="center" |Display Color
 
| align="center" |Display Color
−
| align="center" |16BIT RGB 65K color
+
| align="center" |white/blue
 
|-
 
|-
 
| align="center" |SKU
 
| align="center" |SKU
−
| align="center" |MRB3503
+
| align="center" |MC091GW/MC091GB
 
|-
 
|-
 
| align="center" |Screen Size 
 
| align="center" |Screen Size 
−
| align="center" |3.5(inch)
+
| align="center" |0.91(inch)
 
|-
 
|-
 
| align="center" |Screen Type
 
| align="center" |Screen Type
−
| align="center" |TFT
+
| align="center" |OLED
 
|-
 
|-
 
| align="center" |Driver IC
 
| align="center" |Driver IC
−
| align="center" |ILI9486
+
| align="center" |SSD1306
 
|-
 
|-
 
| align="center" |Resolution
 
| align="center" |Resolution
−
| align="center" |480*320 (Pixel)
+
| align="center" |128*32 (Pixel)
 
|-
 
|-
 
| align="center" |Module Interface
 
| align="center" |Module Interface
−
| align="center" |16Bit parallel interface
+
| align="center" |IIC interface
 
|-
 
|-
 
| align="center" |Active Area 
 
| align="center" |Active Area 
−
| align="center" |48.96x73.44 (mm)
+
| align="center" |22.384x5.584(mm)
 
|-
 
|-
 
| align="center" |Touch Screen Type
 
| align="center" |Touch Screen Type
−
| align="center" |Resistive touch screen
+
| align="center" |have no touch screen
 
|-
 
|-
 
| align="center" |Touch IC
 
| align="center" |Touch IC
−
| align="center" |XPT2046
+
| align="center" |have no IC
 
|-
 
|-
 
| align="center" |Module PCB Size
 
| align="center" |Module PCB Size
−
| align="center" |56.34x98.25 (mm)
+
| align="center" |12.00x38.00(mm)
 
|-
 
|-
−
| align="center" |Operating Temperature  
+
| align="center" |Visual Angle
 +
| align="center" |>160°
 +
|-
 +
| align="center" |Operating Temperature
 
| align="center" | -20℃~60℃
 
| align="center" | -20℃~60℃
 
|-
 
|-
Line 65: Line 68:
 
| align="center" | -30℃~70℃
 
| align="center" | -30℃~70℃
 
|-
 
|-
−
| align="center" |Operating Voltage
+
| align="center" |Operating Voltage  
−
| align="center" |3.3V/5V
+
| align="center" |3.3V~5V
 
|-
 
|-
 
| align="center" |Power Consumption
 
| align="center" |Power Consumption
Line 72: Line 75:
 
|-
 
|-
 
| align="center" |Rough Weight(Package containing)
 
| align="center" |Rough Weight(Package containing)
−
| align="center" |No touch: 47 (g) / With touch: 58 (g)
+
| align="center" |5g
 
|}
 
|}
  
 
==<font color="blue">Interface Definition</font> ==
 
==<font color="blue">Interface Definition</font> ==
−
 
−
[[File:MRB3503-005.jpg|550px]]
 
−
 
−
'''This module hardware only supports 16-bit parallel bus transmission'''
 
  
 
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
 
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
−
| align="center" |Number
 
 
| align="center" |Pin Label
 
| align="center" |Pin Label
−
| align="center" |Description
+
| align="center" |Pin description
−
|-
 
−
| align="center" |1
 
−
| align="center" |CS
 
−
|LCD reset control pin( low level enable)
 
−
|-
 
−
| align="center" |2
 
−
| align="center" |RS
 
−
|LCD register / data selection control pin(high level: register, low level: data)
 
−
|-
 
−
| align="center" |3
 
−
| align="center" |WR
 
−
|LCD write control pin
 
−
|-
 
−
| align="center" |4
 
−
| align="center" |RD
 
−
|LCD read control pin 
 
−
|-
 
−
| align="center" |5
 
−
| align="center" |RST
 
−
|LCD reset control pin( low level reset)
 
−
|-
 
−
| align="center" |6
 
−
| align="center" |DB0
 
−
| rowspan="8" |LCD data bus low 8-bit pin
 
−
|-
 
−
| align="center" |7
 
−
| align="center" |DB1
 
−
|-
 
−
| align="center" |8
 
−
| align="center" |DB2
 
−
|-
 
−
| align="center" |9
 
−
| align="center" |DB3
 
−
|-
 
−
| align="center" |10
 
−
| align="center" |DB4
 
−
|-
 
−
| align="center" |11
 
−
| align="center" |DB5
 
−
|-
 
−
| align="center" |12
 
−
| align="center" |DB6
 
−
|-
 
−
| align="center" |13
 
−
| align="center" |DB7
 
−
|-
 
−
| align="center" |14
 
−
| align="center" |DB8
 
−
| rowspan="8" |LCD data bus high 8-bit pin
 
−
|-
 
−
| align="center" |15
 
−
| align="center" |DB9
 
−
|-
 
−
| align="center" |16
 
−
| align="center" |DB10
 
−
|-
 
−
| align="center" |17
 
−
| align="center" |DB11
 
−
|-
 
−
| align="center" |18
 
−
| align="center" |DB12
 
−
|-
 
−
| align="center" |19
 
−
| align="center" |DB13
 
−
|-
 
−
| align="center" |20
 
−
| align="center" |DB14
 
−
|-
 
−
| align="center" |21
 
−
| align="center" |DB15
 
−
|-
 
−
| align="center" |22
 
−
| align="center" |SDCS
 
−
|SD card selection control pin (used when using the SD card expansion function, this test program is not used)
 
−
|-
 
−
| align="center" |23
 
−
| align="center" |BL
 
−
|LCD backlight control pin(High level light)
 
−
|-
 
−
| align="center" |24
 
−
| align="center" |VDD
 
−
| rowspan="2" |Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
 
−
|-
 
−
| align="center" |25
 
−
| align="center" |VDD
 
−
|-
 
−
| align="center" |26
 
−
| align="center" |GND
 
−
| rowspan="2" |Module power ground pin
 
 
|-
 
|-
−
| align="center" |27
 
 
| align="center" |GND
 
| align="center" |GND
 +
| align="center" |OLED power ground
 
|-
 
|-
−
| align="center" |28
+
| align="center" |VCC
−
| align="center" |5V
+
| align="center" |OLED power positive (3.3V~5V)
−
|LCD backlight power positive pin (default shared onboard backlight power supply, this pin can not be connected)
 
−
|-
 
−
| align="center" |29
 
−
| align="center" |MISO
 
−
|Touch screen SPI bus data input pin
 
−
|-
 
−
| align="center" |30
 
−
| align="center" |MOSI
 
−
|Touch screen SPI bus data output pin
 
−
|-
 
−
| align="center" |31
 
−
| align="center" |PEN
 
−
|Touch screen interrupt detection pin(Low level when a touch occurs)
 
 
|-
 
|-
−
| align="center" |32
+
| align="center" |SCL
−
| align="center" |F_CS
+
| align="center" |OLED IIC bus clock signal
−
|Flash chip select control pin (used when using the Flash extension function, this test program is not used)
 
 
|-
 
|-
−
| align="center" |33
+
| align="center" |SDA
−
| align="center" |T_CS
+
| align="center" |OLED IIC bus data signal
−
|Touch screen IC chip select control pin(Low level enable)
 
−
|-
 
−
| align="center" |34
 
−
| align="center" |CLK
 
−
|Touch screen SPI bus clock control pin
 
 
|-
 
|-
 
|}
 
|}
  
−
==<font color="blue">How to use on STM32 development board</font> ==
+
==<font color="blue">Product Documentation</font> ==
−
 
 
−
This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:
 
−
 
 
−
*'''Step 1: Download the test program'''
 
−
 
 
−
# Download the STM32 test program from the [[#Program Download|'''Program Download''']] column
 
−
# For a description of the relevant test procedures, please refer to the test program documentation in the package
 
−
 
 
−
*'''Step 2: Connect the STM32 development board'''
 
−
 
 
−
# Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
 
−
::and then plug them directly into the Slot
 
−
 
 
−
*'''Step 3: Compile and download the program to the development board'''
 
−
 
 
−
# Compile and download the program you need to test to the STM32 development board（[http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_CN.pdf <font color="red"> '''Don't know how to compile and download?'''</font>]）
 
  
−
*'''Step 4: Observe the running of the program'''
+
* [http://www.lcdwiki.com/res/MC091GX/0.91inch_IIC_OLED_Module_MC091GX_User_Manual_EN.pdf '''0.91inch IIC_OLED Module User Manual''']
−
 
+
* [http://www.lcdwiki.com/res/MC091GX/SPEC%20QG-2832TSWFG02%20VER%20B.pdf '''0.91inch OLED Specification''']
−
# After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.
+
* [http://www.lcdwiki.com/zh/images/4/4f/0.91_size.png '''0.91 inch IIC_OLED Module Size Picture''']
 +
* [http://www.lcdwiki.com/res/MC091GX/0.91inch_OLED_Schematic.pdf '''0.91inch IIC_OLED Module Schematic''']
 +
* [http://www.lcdwiki.com/res/MC091GX/Altium_Package_Library.zip '''0.91inch IIC_OLED Module OLED Schematic and PCB Package Library''']
 +
* [http://www.lcdwiki.com/res/MC091GX/SSD1306-Revision%201.5.pdf '''Driver IC SSD1306 Datasheet''']
  
 
==<font color="blue">Program Download</font> ==
 
==<font color="blue">Program Download</font> ==
  
−
* [http://www.lcdwiki.com/res/Program/Parallel_Port/3.5inch/16BIT_ILI9486_MRB3503_V1.0/3.5inch_16BIT_Module_ILI9486_MRB3503_V1.0.zip '''3.5inch 16bit Parallel-Port Module package''']
+
* [http://www.lcdwiki.com/res/Program/OLED/0.91inch/IIC_SSD1306_MC091GX_V1.0/0.91inch_IIC_OLED_Module_SSD1306_MC091GX_V1.0.zip '''0.91inch IIC_OLED Module Package''']
−
 
 
−
==<font color="blue">Product Documentation</font> ==
 
−
 
 
−
* [http://www.lcdwiki.com/res/MRB3503/3.5inch_16BIT_Module_MRB3503_User_Manual_EN.pdf '''3.5inch 16bit Parallel-Port Module User Manual''']
 
−
* [http://www.lcdwiki.com/res/MRB3503/QD-TFT3501_specification_v1.1.pdf '''3.5inch TFTLCD Specification''']
 
−
* [http://www.lcdwiki.com/res/MRB3503/3.5inch_MRB3503_Size.pdf '''3.5inch 16bit Parallel-Port Module Size Picture''']
 
−
* [http://www.lcdwiki.com/res/MRB3503/3.5inch_MRB3503_Schematic_V1.0.pdf '''3.5inch 16bit Parallel-Port Module Schematic''']
 
−
* [http://www.lcdwiki.com/res/MRB3503/Altium_Package_library.zip '''3.5inch 16bit Parallel-Port Module LCD Schematic and PCB Package Library''']
 
−
* [http://www.lcdwiki.com/res/MRB3503/ILI9486_Datasheet.pdf '''Driver IC ILI9486 Data sheet''']
 
−
 
 
  
 
==<font color="blue">Reference Materials</font> ==
 
==<font color="blue">Reference Materials</font> ==
  
 +
* [http://www.lcdwiki.com/res/PublicFile/Arduino_IDE_Use_Illustration_EN.pdf '''Arduino IDE software use illustration''']
 +
* [http://www.lcdwiki.com/res/PublicFile/Raspberrypi_Use_Illustration_EN.pdf '''RaspberryPi GPIO library installation instructions''']
 +
* [http://www.lcdwiki.com/res/PublicFile/Python_Image_Library_Install_Illustration_EN.pdf '''Python Image Library installation instructions''']
 
* [http://www.lcdwiki.com/res/PublicFile/C51_Keil%26stc-isp_Use_Illustration_EN.pdf '''C51 Keil and stc-isp software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/C51_Keil%26stc-isp_Use_Illustration_EN.pdf '''C51 Keil and stc-isp software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_EN.pdf '''STM32 keil software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_EN.pdf '''STM32 keil software use illustration''']

Latest revision as of 10:06, 5 August 2019


语言选择

Languages

➤中文
➤EN


Product Picture

0.91-OLED-main.jpg0.91-OLED-2pin.jpg0.91-OLED-4pin-2.jpg

Product Description

  • 0.91 inch OLED screen with black and white or black and blue color display
  • 128x32 resolution for clear display and high contrast
  • Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
  • Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
  • With IIC bus, only a few IOs can be used to light up the display
  • Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
  • Military-grade process standards, long-term stable work
  • Provides a rich sample program for STM32, C51, Arduino, and Raspberry Pi platforms
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color white/blue
SKU MC091GW/MC091GB
Screen Size  0.91(inch)
Screen Type OLED
Driver IC SSD1306
Resolution 128*32 (Pixel)
Module Interface IIC interface
Active Area  22.384x5.584(mm)
Touch Screen Type have no touch screen
Touch IC have no IC
Module PCB Size 12.00x38.00(mm)
Visual Angle >160°
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
Operating Voltage 3.3V~5V
Power Consumption TBD
Rough Weight(Package containing) 5g

Interface Definition

Pin Label Pin description
GND OLED power ground
VCC OLED power positive (3.3V~5V)
SCL OLED IIC bus clock signal
SDA OLED IIC bus data signal

Product Documentation

Program Download

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=0.91inch_IIC_OLED_Module_SSD1306_SKU:MC091GX&oldid=2739"