Difference between revisions of "0.96inch SPI OLED Module"

From LCD wiki
Jump to: navigation, search
(→‎Product Description)
Line 13: Line 13:
 
==<font color="blue">Product Description</font> ==
 
==<font color="blue">Product Description</font> ==
  
−
* 1.3 inch OLED screen with black and white or black and blue color display
+
* 0.96 inch OLED screen with black and white, black or blue or yellow and blue color display
 
* 128x64 resolution for clear display and high contrast
 
* 128x64 resolution for clear display and high contrast
 
* Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
 
* Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
 
* Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
 
* Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
−
* With IIC bus, only a few IOs can be used to light up the display
+
* The default is 4-wire SPI bus, which can choose 3-wire SPI bus or IIC bus
 
* Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
 
* Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
 
* Military-grade process standards, long-term stable work
 
* Military-grade process standards, long-term stable work
Line 29: Line 29:
 
|-
 
|-
 
| align="center" |Display Color
 
| align="center" |Display Color
−
| align="center" |white/blue
+
| align="center" |White, blue, yellow and blue
 
|-
 
|-
 
| align="center" |SKU
 
| align="center" |SKU
−
| align="center" |MC130VW/MC130VB
+
| align="center" |MSP096B
 +
MSP096W
 +
 
 +
MSP096Y
 
|-
 
|-
 
| align="center" |Screen Size 
 
| align="center" |Screen Size 
−
| align="center" |1.3(inch)
+
| align="center" |0.96(inch)
 
|-
 
|-
 
| align="center" |Screen Type
 
| align="center" |Screen Type
Line 41: Line 44:
 
|-
 
|-
 
| align="center" |Driver IC
 
| align="center" |Driver IC
−
| align="center" |SH1106
+
| align="center" |SSD1306
 
|-
 
|-
 
| align="center" |Resolution
 
| align="center" |Resolution
Line 47: Line 50:
 
|-
 
|-
 
| align="center" |Module Interface
 
| align="center" |Module Interface
−
| align="center" |IIC interface
+
| align="center" |3-line、4-line SPI、IIC interface
 
|-
 
|-
 
| align="center" |Active Area 
 
| align="center" |Active Area 
−
| align="center" |29.42x14.7(mm)
+
| align="center" |21.744x10.864 (mm)
 
|-
 
|-
 
| align="center" |Touch Screen Type
 
| align="center" |Touch Screen Type
Line 59: Line 62:
 
|-
 
|-
 
| align="center" |Module PCB Size
 
| align="center" |Module PCB Size
−
| align="center" |33.50x35.40(mm)
+
| align="center" |27.3x27.8 (mm)
 
|-
 
|-
 
| align="center" |Visual Angle
 
| align="center" |Visual Angle
Line 77: Line 80:
 
|-
 
|-
 
| align="center" |Rough Weight(Package containing)
 
| align="center" |Rough Weight(Package containing)
−
| align="center" |10(g)
+
| align="center" |8(g)
 
|}
 
|}
  
Line 92: Line 95:
  
 
'''NOTE:'''
 
'''NOTE:'''
 +
 
:1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
 
:1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
 
::A.Solder the '''0x78''' side resistance, disconnect the '''0x7A''' side, then select the '''0x78''' slave address (default);
 
::A.Solder the '''0x78''' side resistance, disconnect the '''0x7A''' side, then select the '''0x78''' slave address (default);

Revision as of 10:45, 12 September 2019


语言选择

Languages

➤中文
➤EN


Product Picture

0.96-OLED-7pin-main-30.jpg 0.96-OLED-7pin-20.jpg 0.96-OLED-7pin-blue-2.jpg

Product Description

  • 0.96 inch OLED screen with black and white, black or blue or yellow and blue color display
  • 128x64 resolution for clear display and high contrast
  • Large viewing angle: greater than 160° (one screen with the largest viewing angle in the display)
  • Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
  • The default is 4-wire SPI bus, which can choose 3-wire SPI bus or IIC bus
  • Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
  • Military-grade process standards, long-term stable work
  • Provides a rich sample program for STM32, C51, Arduino, Raspberry Pi and MSP430 platforms
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color White, blue, yellow and blue
SKU MSP096B

MSP096W

MSP096Y

Screen Size  0.96(inch)
Screen Type OLED
Driver IC SSD1306
Resolution 128*64 (Pixel)
Module Interface 3-line、4-line SPI、IIC interface
Active Area  21.744x10.864 (mm)
Touch Screen Type have no touch screen
Touch IC have no IC
Module PCB Size 27.3x27.8 (mm)
Visual Angle >160°
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
Operating Voltage 3.3V~5V
Power Consumption TBD
Rough Weight(Package containing) 8(g)

Interface Definition

无框 无框
Picture 1. Module pin silk screen Picture 2. Rear view of the module


NOTE:

1.This module supports IIC slave device address switching (shown in red box in Picture 4), as follows:
A.Solder the 0x78 side resistance, disconnect the 0x7A side, then select the 0x78 slave address (default);
B.Solder the 0x7A side resistance, disconnect the 0x78 side, then select the 0x7A slave address;
2.The hardware switches the IIC slave device address, and the software also needs to be modified accordingly.
For details, see the test program description document or the user manual..
Number Module Pin Pin description
1 VCC OLED power positive (3.3V~5V)
2 GND OLED power ground
3 SCL OLED IIC bus clock signal
4 SDA OLED IIC bus data signal

Product Documentation

Program Download

Reference Materials

Common Software

BACK TO TOP

Retrieved from "http://www.lcdwiki.com/index.php?title=0.96inch_SPI_OLED_Module&oldid=2831"