Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

1.8inch SPI Module ST7735S SKU:MSP1804

From LCD wiki

语言选择

Languages

➤中文
➤EN


Product Video

Product Picture

Product Description

  • 1.8-inch color screen,support 65K color display,display rich colors
  • 128X160 resolution, clear display
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display
  • With SD card slot for convenient function expansion
  • Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color 16BIT RGB 65K color
SKU MSP1804
Screen Size  1.8(inch)
Type TFT
Driver IC ST7735S
Resolution 128*160 (Pixel)
Module Interface 4-wire SPI interface
Backlight 2 White Led
Active Area (AA area) 28.03x35.04 (mm)
Module PCB Size 44.96x53.47 (mm)
Operating Temperature -10℃~70℃
Storage Temperature -20℃~70℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption About 90mA
Product Weight About 25(g)

Interface Definition

Number Pin Label Description
1 VCC 5V/3.3V power input
2 GND Ground
3 CS LCD chip select signal, low level enable
4 RESET LCD reset signal, low level reset
5 DC/RS LCD register / data selection signal,

high level: register, low level: data

6 SDI/MOSI SPI bus write data signal
7 SCK SPI bus clock signal
8 LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

9 SDO/MISO SPI bus read data signal, if you do not need to the read function, you can not connect it
Number Pin Label Description
1 RST LCD reset signal, low level reset
2 CS LCD chip select signal, low level enable
3 D/C LCD register / data selection signal,

high level: register, low level: data

4 DIN LCD SPI bus write data signal
5 CLK LCD SPI bus clock signal
6 VCC LCD Power positive (3.3V~5V)
7 BL Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

8 GND LCD Power ground

Product Documentation

Program Download

  1. Demo_Arduino_Mega2560_Hardware_SPI
  2. Demo_Arduino_Mega2560_Software_SPI
  3. Demo_Arduino_UNO_Hardware_SPI
  4. Demo_Arduino_UNO_Software_SPI
  5. Demo_C51_STC12C5A60S2_Hardware_SPI
  6. Demo_C51_STC12C5A60S2_Software_SPI
  7. Demo_C51_STC89C52RC_Software_SPI
  8. Demo_STM32F103RCT6_Hardware_SPI
  9. Demo_STM32F103RCT6_Software_SPI
  10. Demo_STM32F103ZET6_Hardware_SPI
  11. Demo_STM32F103ZET6_Software_SPI
  12. Demo_STM32F407ZGT6_Hardware_SPI
  13. Demo_STM32F407ZGT6_Software_SPI
  14. Demo_STM32F429IGT6_Hardware_SPI
  15. Demo_STM32F429IGT6_Software_SPI

Reference Materials

How to use on Arduino

Common Software

BACK TO TOP