Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3.5inch SPI Module ILI9488 SKU:MSP3520

From LCD wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

语言选择

Languages

➤中文
➤EN


Product Video

Product Picture

Product Description

  • 3.2-inch color screen,support 65K color display,display rich colors
  • 480X320 resolution, optional touch function
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display
  • Easy to expand the experiment with SD card slot
  • Provide a rich sample program
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color RGB 65K color
SKU have touch screen: MSP3520
have no touch screen: MSP3521
Screen Size  3.5(inch)
Type TFT
Driver IC ILI9488
Resolution 480*320 (Pixel)
Module Interface 4-wire SPI interface
Active Area (AA area) 48.96x73.44(mm)
Module PCB Size 56.34x98(mm)
Operating Temperature -20℃~70℃
Storage Temperature -30℃~80℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption About 90mA
Product Weight 25(g)

Interface Definition

Number Pin Label Description
1 VCC 5V/3.3V power input
2 GND Ground
3 CS LCD chip select signal, low level enable
4 RESET LCD reset signal, low level reset
5 DC/RS LCD register / data selection signal,

high level: register, low level: data

6 SDI(MOSI) SPI bus write data signal
7 SCK SPI bus clock signal
8 LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

9 SDO(MISO) SPI bus read data signal, if you do not need to the read function, you can not connect it
(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)
10 T_CLK Touch SPI bus clock signal
11 T_CS Touch screen chip select signal, low level enable
12 T_DIN Touch SPI bus input
13 T_DO Touch SPI bus output
14 T_IRQ Touch screen interrupt signal, low level when touch is detected

Product Documentation

Program Download

  1. Demo_Arduino_Mega2560_Hardware_SPI
  2. Demo_Arduino_Mega2560_Software_SPI
  3. Demo_Arduino_UNO_Hardware_SPI
  4. Demo_Arduino_UNO_Software_SPI
  5. Demo_C51_STC12C5A60S2_Hardware_SPI
  6. Demo_C51_STC12C5A60S2_Software_SPI
  7. Demo_C51_STC89C52RC_Software_SPI
  8. Demo_STM32F103RCT6_Hardware_SPI
  9. Demo_STM32F103RCT6_Software_SPI
  10. Demo_STM32F103ZET6_Hardware_SPI
  11. Demo_STM32F103ZET6_Software_SPI
  12. Demo_STM32F407ZGT6_Hardware_SPI
  13. Demo_STM32F407ZGT6_Software_SPI
  14. Demo_STM32F429IGT6_Hardware_SPI
  15. Demo_STM32F429IGT6_Software_SPI

Reference Materials

How to use on Arduino

Common Software

BACK TO TOP