More actions
| Line 96: | Line 96: | ||
|- | |- | ||
| align="center" |5 | | align="center" |5 | ||
| align="center" | | | align="center" |DC/RS | ||
|LCD register / data selection signal, | |LCD register / data selection signal, | ||
high level: register, low level: data | high level: register, low level: data | ||
|- | |- | ||
| align="center" |6 | | align="center" |6 | ||
| align="center" | | | align="center" |SDI/MOSI | ||
|SPI bus write data signal | |SPI bus write data signal | ||
|- | |- | ||
| Line 112: | Line 112: | ||
|Backlight control, high level lighting, | |Backlight control, high level lighting, | ||
if not controlled, connect 3.3V always bright | if not controlled, connect 3.3V always bright | ||
|- | |||
|9 | |||
|SDO/MISO | |||
|SPI bus read data signal, if you do not need to the read function, you can not connect it | |||
|- | |- | ||
|} | |} | ||
Revision as of 11:49, 30 November 2018
Product Video
Product Picture
Product Description
- 2.2-inch color screen,support 65K color display,display rich colors
- 320X240 resolution, clear display
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Provide a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | MSP2202 |
| Screen Size | 2.2(inch) |
| Type | TFT |
| Driver IC | ILI9341 |
| Resolution | 320*240 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 33.84x45.12(mm) |
| Module PCB Size | 40.10x67.20(mm) |
| Operating Temperature | -20℃~70℃ |
| Storage Temperature | -30℃~80℃ |
| VCC power voltage | 3.3V~5V |
| Logic IO port voltage | 3.3V(TTL) |
| Power Consumption | About 90mA |
| Product Weight | 25(g) |
Interface Definition
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RESET | LCD reset signal, low level reset |
| 5 | DC/RS | LCD register / data selection signal,
high level: register, low level: data |
| 6 | SDI/MOSI | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | Backlight control, high level lighting,
if not controlled, connect 3.3V always bright |
| 9 | SDO/MISO | SPI bus read data signal, if you do not need to the read function, you can not connect it |
Product Documentation
- 1.8 inch SPI Module User Manual
- 1.8 inch TFT Specifications
- 1.8 inch SPI Module Size Picture
- 1.8 inch SPI Module Schematic
- Driver IC ST7735S Data sheet
Program Download
- Demo_Arduino_Mega2560_Hardware_SPI
- Demo_Arduino_Mega2560_Software_SPI
- Demo_Arduino_UNO_Hardware_SPI
- Demo_Arduino_UNO_Software_SPI
- Demo_C51_STC12C5A60S2_Hardware_SPI
- Demo_C51_STC12C5A60S2_Software_SPI
- Demo_C51_STC89C52RC_Software_SPI
- Demo_STM32F103RCT6_Hardware_SPI
- Demo_STM32F103RCT6_Software_SPI
- Demo_STM32F103ZET6_Hardware_SPI
- Demo_STM32F103ZET6_Software_SPI
- Demo_STM32F407ZGT6_Hardware_SPI
- Demo_STM32F407ZGT6_Software_SPI
- Demo_STM32F429IGT6_Hardware_SPI
- Demo_STM32F429IGT6_Software_SPI
Reference Materials
- Arduino IDE software use illustration
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings