Difference between revisions of "3.5inch RPi Display"
(→Usage) (Tag: Visual edit) |
|||
Line 120: | Line 120: | ||
|} | |} | ||
− | |||
− | == | + | ==Driver Installation== |
+ | This LCD Module need install driver first. | ||
===Step 1:Download the Raspbian IMG=== | ===Step 1:Download the Raspbian IMG=== | ||
https://www.raspberrypi.org/downloads/raspbian/ | https://www.raspberrypi.org/downloads/raspbian/ | ||
Line 128: | Line 128: | ||
If you don't know how to do that,you can refer to the [https://www.raspberrypi.org/documentation/installation/installing-images/README.md Raspberry Pi office tutorial] | If you don't know how to do that,you can refer to the [https://www.raspberrypi.org/documentation/installation/installing-images/README.md Raspberry Pi office tutorial] | ||
− | ===Step 3: Open terminal and | + | ===Step 3: Open terminal(SSH) and install the driver on RaspberryPi=== |
− | + | (tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO) | |
− | + | ||
− | '''Run:''' | + | '''Run:'''<br> |
{{code|1= | {{code|1= | ||
sudo rm -rf LCD-show | sudo rm -rf LCD-show | ||
Line 163: | Line 163: | ||
*Install the reference link:[[How to install Soft Keyboard]] | *Install the reference link:[[How to install Soft Keyboard]] | ||
+ | |||
+ | == Resouce == | ||
+ | |||
+ | |||
+ | If you don't have anything display after the Step:Driver installation ,you can try to used this configned IMAGEs for test. | ||
+ | |||
+ | * IMAGE Download: | ||
+ | |||
+ | ==<font color="blue"> 资源下载</font>== | ||
+ | |||
+ | *'''文档''' | ||
+ | |||
+ | # | ||
+ | |||
+ | *'''驱动下载''' | ||
+ | |||
+ | # 本地下载:[http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] | ||
+ | |||
+ | *'''镜像下载''' | ||
+ | |||
+ | :如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常,请先使用我们预装好驱动的镜像, | ||
+ | :下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。 | ||
+ | |||
+ | {| class="wikitable" border="1" style="width: 80%; margin-left:1.5%;background-color: white;" | ||
+ | !Image Name | ||
+ | !Version | ||
+ | !Support | ||
+ | !Password | ||
+ | ! colspan="2" |Download | ||
+ | |- | ||
+ | | rowspan="2" |Raspbian | ||
+ | | rowspan="2" |2018-03-13 | ||
+ | | rowspan="2" |PI3B+/A/A+/B/B+/PI2/ | ||
+ | PI3/ZERO/ZERO W | ||
+ | | rowspan="2" |user:pi | ||
+ | password:raspberry | ||
+ | |(addr1)Baidu Pan: | ||
+ | |[https://pan.baidu.com/s/1B0Eo6eFdkawiroH71s3NCg 3.5SPI_RPI3B+_rasbian20180418.7z] | ||
+ | |- | ||
+ | |(addr2)Mega: | ||
+ | |Wait For Upload | ||
+ | |- | ||
+ | | rowspan="2" |Ubuntu | ||
+ | | rowspan="2" |Mate:16.04 | ||
+ | | rowspan="2" |PI3,PI2 | ||
+ | | rowspan="2" |user:pi | ||
+ | password:raspberry | ||
+ | |(addr1)Baidu Pan: | ||
+ | |[https://pan.baidu.com/s/1dq_zQy5oS5MsxyCdpt_gDw 3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z] | ||
+ | |- | ||
+ | |(addr2)Mega: | ||
+ | |3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z | ||
+ | |- | ||
+ | | rowspan="2" |Kali-linux | ||
+ | | rowspan="2" |2017.2 | ||
+ | | rowspan="2" |PI3B+,PI3,PI2 | ||
+ | | rowspan="2" |user:root | ||
+ | password:toor | ||
+ | |(addr1)Baidu Pan: | ||
+ | |[https://pan.baidu.com/s/1t_wio43HhNwRc1lR5oFOmQ 3.5SPI-kali-linux-2018.2-rpi3B+-nexmon.7z] | ||
+ | |- | ||
+ | |(addr2)Mega: | ||
+ | |Wait For Upload | ||
+ | |} | ||
+ | |||
+ | * '''常用软件''' | ||
+ | |||
+ | # [http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] | ||
+ | # [http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] | ||
+ | # [http://www.lcdwiki.com/res/software/putty.zip PuTTY] | ||
[[#top|BACK TO TOP]] | [[#top|BACK TO TOP]] |
Revision as of 10:48, 3 July 2018
Contents
Features
- 320×480 resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Size perfectly fits the Pi
- High quality immersion gold surface plating
- Supports Raspbian system, ubuntu system ,kali Linux system
Key Parameters
SKU | MPI3501 |
LCD Type | TFT |
LCD Interface | SPI |
Touch Screen Type | Resistive |
Touch Screen Controller | XPT2046 |
Colors | 65536 |
Backlight | LED |
Resolution | 320*240 (Pixel) |
Aspect Ratio | 8:5 |
Backlight Current | TBD |
Operating Temp. (℃) | TBD |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 22 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
12 | KEY1 | Key |
13 | RST | Reset |
15 | LCD_RS | LCD instruction control, Instruction/Data Register selection |
16 | KEY2 | KEY |
18 | KEY3 | KEY |
19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
24 | LCD_CS | LCD chip selection, low active |
26 | TP_CS | Touch Panel chip selection, low active |
Driver Installation
This LCD Module need install driver first.
Step 1:Download the Raspbian IMG
https://www.raspberrypi.org/downloads/raspbian/
Step 2: Burn the system image
If you don't know how to do that,you can refer to the Raspberry Pi office tutorial
Step 3: Open terminal(SSH) and install the driver on RaspberryPi
(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)
Run:
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./LCD35-show
Wait A Few Minutes, when the system reboot ok, you can see that.
Touch screen calibration
- This LCD can be calibrated using a program called xinput_calibrator
- Install it with the commands:
cd LCD-show/
sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
- Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
- Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
- You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
/ect/X11/xorg.conf.d/99-calibration.conf
- Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:
Install Soft Keyboard
- Install the reference link:How to install Soft Keyboard
Resouce
If you don't have anything display after the Step:Driver installation ,you can try to used this configned IMAGEs for test.
- IMAGE Download:
资源下载
- 文档
- 驱动下载
- 本地下载:LCD-show.tar.gz
- 镜像下载
- 如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常,请先使用我们预装好驱动的镜像,
- 下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。
Image Name | Version | Support | Password | Download | |
---|---|---|---|---|---|
Raspbian | 2018-03-13 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
(addr1)Baidu Pan: | 3.5SPI_RPI3B+_rasbian20180418.7z |
(addr2)Mega: | Wait For Upload | ||||
Ubuntu | Mate:16.04 | PI3,PI2 | user:pi
password:raspberry |
(addr1)Baidu Pan: | 3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z |
(addr2)Mega: | 3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z | ||||
Kali-linux | 2017.2 | PI3B+,PI3,PI2 | user:root
password:toor |
(addr1)Baidu Pan: | 3.5SPI-kali-linux-2018.2-rpi3B+-nexmon.7z |
(addr2)Mega: | Wait For Upload |
- 常用软件