More actions
Line 6: | Line 6: | ||
}} | }} | ||
== <font color="blue">Product pictures</font>== | == <font color="blue">Product pictures</font>== | ||
[[File:3.5-MHS-main-2-20181107-9.jpg|300px]][[File:3.5-MHS-5.jpg|300px]][[File:MHS3521-012.jpg|300px]] | [[File:3.5-MHS-main-2-20181107-9.jpg|300px]][[File:3.5-MHS-5.jpg|300px]][[File:MHS3521-012.jpg|300px]][[File:3.5-MHS-100-2-20181107-9.jpg|300px]] | ||
==<font color="blue"> Features</font>== | ==<font color="blue"> Features</font>== |
Revision as of 14:00, 9 November 2018
Product pictures
Features
- Physical resolution 320 x 480, with resistive touch control
- It supports up to 125MHz SPI signal input, showing stable no screen and no flicker
- With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
- Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
- Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+)
- Support Raspbian/Ubuntu/Kali system, provide driver and image
- This product has passed CE and RoHS certification
Key Parameters
SKU | MHS3521 |
LCD Type | TFT |
LCD Interface | SPI (upports up to 125MHz SPI input) |
Touch Screen Type | Resistive |
Touch Screen Controller | XPT2046 |
Colors | 65536 |
Backlight | LED |
Resolution | 320*480 (Pixel) |
power consumption | 120ma |
Working temperature(℃) | -20~70 |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 22 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
12 | KEY1 | Key |
13 | RST | Reset |
15 | LCD_RS | LCD instruction control, Instruction/Data Register selection |
16 | KEY2 | KEY |
18 | KEY3 | KEY |
19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
24 | LCD_CS | LCD chip selection, low active |
26 | TP_CS | Touch Panel chip selection, low active |
Driver Installation
Step1,Install the Raspbian/UbuntuMate official mirror (Q:How to?)
- (1) Download the latest Raspbian/ubuntumate mirror from official
- (2) Use <SDFormatter> to format Micro SD card
- (3) Use <Win32DiskImager> to burn the official image to Micro SD card
Step2,Connect with RaspberryPi
- Align right-side to insert the LCD screen
- Plug-in MicroSD card, connect network and power
Step3,Install Driver for RaspberryPi
- (1)Login to raspberryPi terminal by SSH (user name: pi ,password :raspberry) (Q:How to?)
- (2)Execute the following commands (raspberryPi needs to connect Internet):
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./MHS35-show
- (3) After the above commands are executed, the system will automatically restart and be able to display and touch normally now.
- Note: after installing this driver, the HDMI output will be disabled. If it is necessary to switch back to the HDMI display, execute:
sudo ./LCD-hdmi
Download Resources
- Document
- MHS-3.5inch_QuickStart
- How_to_install_matchbox-keyboard
- How_to_calibrate_the_resistance_touch_screen-V1.2
- How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
- Driver download
- download:LCD-show.tar.gz
- Images download
- If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
- Please Try our Configned images for tested.
- Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name | Version | Support | Password | Download | |
---|---|---|---|---|---|
Raspbian | 2018-06-27 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user: pi
password: raspberry |
360Yun: | 3.5inch-MHS-Raspbian-20181009.7z |
Mega: | 3.5inch-MHS-Raspbian-20181009.7z | ||||
Ubuntu | Mate:16.04 | PI3,PI2 | user: pi
password: raspberry |
360Yun: | MHS35-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi.7z |
Mega: | MHS35-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi.7z | ||||
Kali-linux | 2018.3,nexmon | PI3B+,PI3,PI2 | user: root
password: toor |
360Yun: | MHS35-kali-linux-2018.3-rpi3-nexmon.7z |
Mega: | MHS35-kali-linux-2018.3-rpi3-nexmon.7z | ||||
RetroPie | April 14, 2018. | PI3B+,PI3,PI2 | user: pi
password: raspberry |
360Yun: | MHS35-retropie-4.4-rpi2_rpi3.7z |
Mega: | MHS35-retropie-4.4-rpi2_rpi3.7z | ||||
RetroPie | April 14, 2018. | Pi1/ZERO/ZERO W | user: pi
password: raspberry |
360Yun: | MHS35-retropie-4.4-rpi1_zero.7z |
Mega: | MHS35-retropie-4.4-rpi1_zero.7z |
- Software