更多语言
更多操作
Product Images
ES3R50T-TopView
ES3R50T-BottomView
Product Introduction
- Equipped with ESP32-S3 chip, powerful performance and abundant development resources for convenient development
- 5-inch color screen with 800×480 resolution, rich display colors (RGB565)
- Abundant peripheral interfaces for easy connection of SPI, UART and other external devices
- Built-in resistive touch screen for convenient human-machine interaction
- Standard Type-C interface for program uploading and power supply
- Onboard Micro TF card slot for storage expansion
- Built-in audio interface for speaker connection and audio playback
- Complete demo programs provided for easy learning
- Technical support for underlying drivers with online updated WIKI documents
Product Parameters
ESP32 Main Controller Parameters
| Item | Parameter |
|---|---|
| Module Chip | ESP32-S3 |
| CPU | Xtensa LX7 32-bit Dual-Core Processor |
| Max Clock Frequency | 240MHz |
| Storage Resources | 384 KB ROM + 512KB SRAM
+16 KB RTC SRAM + 8M Built-in OPI PSRAM + 16M External QSPI Flash (N16R8) |
| Wi-Fi | 2.4GHz, 802.11b/g/n standard |
| Bluetooth | Bluetooth V5.0 BR/EDR & BLE |
| Core Operating Voltage | 3.0~3.6(V) |
LCD Screen Parameters
| Item | Parameter |
|---|---|
| Screen Size | 5inch |
| Panel Type | TN |
| Resolution | 800xRGBx480(pixels) |
| Active Display Area | 108.00(W)×64.80(H) mm |
| Color Depth | 65K (RGB565) |
| Display Interface | RGB565-16Bit |
| Pixel Pitch | 0.153(H)×0.153(V) mm |
| Viewing Angle | 6 o'clock |
| Typical Backlight Brightness | 450cd/m2 |
| Backlight Type | White LED |
| Operating Temperature | -20~60℃ |
| Storage Temperature | -30~70℃ |
Other General Parameters
| Item | Parameter | |
|---|---|---|
| SKU | ES3R50T | |
| Active Area Size | 5 inch | |
| Supply Voltage | 5.0V | |
| Power Interface | USB Type-C | |
| Typical Total Current | 250mA | |
| Actual Backlight Brightness | 450cd/m2 | |
| Typical Power Consumption | 1.25W | |
| Touch Panel Type | Resistive Touch Screen | |
| Touch Resolution | 800x480(pixels) | |
| Touch Driver IC | XPT2046 | |
| Touch Communication Bus | SPI | |
| LCD Outline Dimension | 120.7(W)×75.9(H)×4.2(D) mm (Excluding FPC cable & adhesive tape) | |
| Touch Panel Outline Dimension | 117.5(W)×70.2(H) mm (Excluding FPC cable & adhesive tape) | |
| Module Overall Dimension | 137(W)×84(H)×13.75(D) mm | |
| Operating Temperature | -20~60℃ | |
| Storage Temperature | -30~70℃ | |
| Weight (Including Package) | Resistive Version (ES3R50P): 197 g | |
Interface Definition
Interface Function Description
| Interface No. | Function Description |
|---|---|
| ① ESP32-S3 Chip | Main controller of the display module, responsible for controlling onboard and external peripherals. |
| ② MicroSD Card Slot | For Micro SD card insertion to expand storage space, to store large-capacity files such as font libraries, pictures and audio files. |
| ③ UART Port | 1.25mm 4P connector, used for serial debugging, firmware uploading and data communication. |
| ④ BOOT Button | Used to enter download mode or as a normal test button.
Hold this button while powering on the module then release to enter download mode; Or keep holding BOOT after power-on, press and release the RESET button, then release BOOT to enter download mode. It can work as a regular button when download mode is not required. |
| ⑤ Type-C Port | Main port for power supply and firmware uploading. Connected with auto-download circuit, which can automatically switch to download mode without pressing the BOOT button. |
| ⑥ RESET Button | Reset pin for ESP32-S3 main chip and LCD screen, active low when pressed. |
| ⑦ Extended Input Header | 1.25mm 4P connector, leads out GPIO17 & GPIO18 pins. |
| ⑧ UART1 & USB Header | 1.25mm 4P connector, leads out GPIO17, GPIO18, GPIO19, GPIO20 spare pins. GPIO17/GPIO18 for UART1; GPIO19/GPIO20 for USB differential signals. |
| ⑨ SPI Peripheral Header | 1.25mm 4P connector for external SPI devices, shared with SD card bus. Can be used as general GPIO when SPI peripheral is idle. |
| ⑩ Speaker Header | 1.25mm 2P connector for speaker connection and audio playback. |
ESP32 Pin Assignment Table
| On-board Device | ESP32 GPIO Pin | Pin Function Description |
|---|---|---|
| LCD Screen | IO40 | LCD chip select signal, active low |
| IO46 | Data Enable (DE) Control Pin | |
| IO41 | Vertical Sync (VSYNC) Control Pin | |
| IO39 | Horizontal Sync (HSYNC) Control Pin | |
| IO42 | Pixel Clock (PCLK) Control Pin | |
| IO45/48/47/21/14 | 5-bit Red Data Pins | |
| IO5/6/7/15/16/4 | 6-bit Green Data Pins | |
| IO8/3/46/9/1 | 5-bit Blue Data Pins | |
| Resistive Touch Screen | IO12 | SPI Clock (SCLK) for XPT2046 touch IC |
| IO13 | SPI MISO (Master Input, data read) | |
| IO11 | SPI MOSI (Master Output, data write) | |
| IO38 | Touch SPI Chip Select (CS) Pin | |
| MicroSD Card | IO10 | SD Card SPI Chip Select (CS) Pin |
| IO11 | SD SPI MOSI (Master Output, data write) | |
| IO13 | SD SPI MISO (Master Input, data read) | |
| IO12 | SD SPI Clock (SCLK) Pin | |
| Buttons | IO0 | BOOT strapping button: hold during power-on to enter download mode |
| EN | Global active-low reset pin (shared for ESP32-S3 and LCD) | |
| UART0 | RXD0(IO43) | UART0 receive pin, usable as general GPIO if serial is unused |
| TXD0(IO44) | UART0 transmit pin, usable as general GPIO if serial is unused | |
| External SPI Header | IO19 | External SPI chip select pin, general GPIO available if USB function is disabled |
| IO11 | SPI MOSI pin, general GPIO available if SD card is unused | |
| IO13 | SPI MISO pin, general GPIO available if SD card is unused | |
| IO12 | SPI SCLK pin, general GPIO available if SD card is unused | |
| Extended GPIO Pins | IO18 | General GPIO when touch & audio & SD card are disabled |
| IO17 | General GPIO when audio & SD card are disabled | |
| USB Interface | IO19 | USB D- differential data line |
| IO20 | USB D+ differential data line | |
| UART1 | IO17 | UART1 transmit pin |
| IO18 | UART1 receive pin | |
| I2S Audio Speaker Interface | IO18 | I2S Left/Right Clock (LRCLK) Pin |
| IO17 | I2S Serial Data (SDATA) Pin | |
| IO0 | I2S Bit Clock (BCLK) Pin |
快速使用说明
资料包下载
百度云盘备份链接2:
2.8寸ESP32-S3-ILI9341驱动显示模块资料包(提取码:yvne)
产品文档
规格书
产品规格书
用户手册
尺寸图
原理图

