32x64 English font modulo description

• 32x64 English font modulo description

The size settings are as shown below:

The modulo data is as follows (click to open):

32x64 English ASCII modulo data

The function is defined as follows:

void LCD_Show_6432_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
{
    u32 temp;
    u8 pos,t;
    u16 colortemp=POINT_COLOR;      		   
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+32-1,y+64-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {		
	for(pos=0;pos<64;pos++)
	{
	    temp = (asc2_6432[num][pos*4]<<24)|(asc2_6432[num][pos*4+1]<<16)|(asc2_6432[num][pos*4+2]<<8)|asc2_6432[num][pos*4+3];//Call 6432 font, you need to take the model definition
	    for(t=0;t<32;t++)
	    {                 
		if(temp&0x80000000)
		{
		    Lcd_WriteData_16Bit(fc);
		}
		else 
		{
		    Lcd_WriteData_16Bit(bc); 
		}
		temp<<=1;
	    }
			
	}	
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
        for(pos=0;pos<64;pos++)
	{
	    temp = (asc2_6432[num][pos*4]<<24)|(asc2_6432[num][pos*4+1]<<16)|(asc2_6432[num][pos*4+2]<<8)|asc2_6432[num][pos*4+3];//Call 6432 font, you need to take the model definition
	    for(t=0;t<32;t++)
	    {   
		POINT_COLOR=fc;              
		if(temp&0x80000000)
		{
		    LCD_DrawPoint(x+t,y+pos);//Draw a point 
		}
		temp<<=1;
	    }
	}
    }
    POINT_COLOR=colortemp;	
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen  
}