48x96 English font modulo description

• 48x96 English font modulo description

The size settings are as shown below:

The modulo data is as follows (click to open):

48x96 English ASCII modulo data

The function is defined as follows:

void LCD_Show_4824_char(u16 x,u16 y,u16 fc, u16 bc, u8 num,u8 mode)
{
    u32 temp;
    u8 pos,t;
    u16 colortemp=POINT_COLOR;      		   
    num=num-' ';//Get the offset value
    LCD_SetWindows(x,y,x+24-1,y+48-1);//Set a single text display window
    if(!mode) //Non-overlay mode: The font has a background color, which will overwrite the original display
    {		
	for(pos=0;pos<48;pos++)
	{
	    temp = (asc2_4824[num][pos*3]<<16)|(asc2_4824[num][pos*3+1]<<8)|asc2_4824[num][pos*3+2];//Call 4824 font, you need to take the model definition
	    for(t=0;t<24;t++)
	    {                 
		if(temp&0x800000)
		{
		    Lcd_WriteData_16Bit(fc);
		}
		else 
		{
		    Lcd_WriteData_16Bit(bc); 
		}
		temp<<=1;
	    }
			
	}	
    }
    else//Overlay mode: the font does not have a background color, and is directly superimposed and displayed on the original display content
    {
        for(pos=0;pos<48;pos++)
	{
	    temp = (asc2_4824[num][pos*3]<<16)|(asc2_4824[num][pos*3+1]<<8)|asc2_4824[num][pos*3+2];//Call 4824 font, you need to take the model definition
	    for(t=0;t<24;t++)
	    {   
		POINT_COLOR=fc;              
		if(temp&(0x800000))
		{
		    LCD_DrawPoint(x+t,y+pos);//Draw a point    
		}
		temp<<=1;
	    }
	}
    }
    POINT_COLOR=colortemp;	
    LCD_SetWindows(0,0,lcddev.width-1,lcddev.height-1);//Restore window to full screen  
}