导航菜单
Toggle navigation
英文主页
树莓派显示模块
树莓派HDMI
树莓派MHS显示屏
树莓派GPIO显示屏
SPI显示模块
常规SPI模块
Arduino SPI模块
全视角SPI模块
Arduino显示模块
Arduino UNO
Arduino Mega2560
其他显示模块
8/16位并口模块
OLED显示模块
RGB显示模块
开发板
显示屏
IPS彩屏
TN彩屏
OLED屏
查看“7inch HDMI Display-C”的源代码
←
7inch HDMI Display-C
跳转至:
导航
、
搜索
因为以下原因,您没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
<div style="border:#A7D7F9 1px solid;background:white; padding: 18px 1em;"> {{lan|cn=http://www.lcdwiki.com/zh/7inch_HDMI_Display-C |en=http://www.lcdwiki.com/7inch_HDMI_Display-C }} <tabber> 产品说明= == <font color="blue">产品视频</font> == {{#ev:youku|XMzc0Mzg4NTE5Mg}} ==<font color="blue"> 产品图片</font> == [[File:MPI7002-01.png|无框|650像素]]<br /> [[File:MPI7002-04.jpg|无框|200像素]] [[File:MPI7002-02.jpg|无框|200像素]] [[File:MPI7002-03.jpg|无框|200像素]] == <font color="blue">产品介绍 </font>== * 7inch标准显示器,硬件分辨率为1024×600,可通过软件配置分辨率(最高可支持1920×1080) * 电容触摸屏,最大支持5点触摸 * 支持背光单独控制,可关闭背光节省功耗 * 支持Raspberry Pi、BB Black、Banana Pi等主流mini PC * 可作为通用HDMI显示器使用,如接电脑HDMI作为副显示器 * 用作树莓派显示器,支持Raspbian,Ubuntu,Kodi,win10 IOT,单点触摸,免驱 * 用作电脑显示器,支持win7,win8,win10系统5点触摸(XP及更老版本系统单点触摸),免驱 * 本产品通过CE、RoHS认证 == <font color="blue">产品参数</font> == * 尺寸: 7.0(inch) * SKU: MPI7002 * 分辨率: 1024×600(dots) * 触摸: 五点电容触摸 * 外形尺寸: 164.9*124.27(mm) * 产品重量: 380(g) == <font color="blue">硬件说明</font> == [[文件:MPI7002-HardwareConnection.png.jpg|无框|664x664像素]] *<font color="blue"> '''①'''</font> 背光电源开关:控制背光打开和关闭,可节省功耗。 *<font color="blue"> '''② & ③'''</font> USB 触摸/供电接口:用于供电和触摸输出,两者功能一致,只接任意一个即可。 *<font color="blue"> '''④'''</font> HDMI 接口:用于连接主板和 LCD 显示屏进行HDMI传输。 ==<font color="blue"> 在树莓派Raspbian/Ubuntu Mate/Win10 IoT Core系统中使用 </font>== * '''<small>步骤1, 安装官方镜像</small>''' # 从官方下载最新镜像 # 按官方教程步骤安装好系统 * '''<small>步骤2, 修改config.txt配置文件</small>''' :步骤1烧写完成后, 打开Micro SD卡根目录的'''config.txt'''文件并在文件末端加入以下代码, 保存并安全弹出Micro SD卡: {{code|1= max_usb_current=1 hdmi_force_hotplug=1 config_hdmi_boost=7 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_drive=1 display_rotate=0 hdmi_cvt 1024 600 60 6 0 0 0 }} * '''<small>步骤3,</small>''' :将Micro SD卡插入树莓派,将HDMI线连接树莓派和LCD,将USB线连接树莓派的4个USB口任意一个,USB线另一端连接到LCD的USB口,然后给树莓派上电,如显示和触摸均正常则驱动成功(请使用足2A电源供电) == <font color="blue">如何作为电脑显示器使用</font> == * 使用HDMI连接线将电脑HDMI输出信号连接至LCD的HDMI接口 * 将MicroUSB连接线一端连接LCD的USB Touch接口(两个MicroUSB任意一个均可),另一端连接至电脑的USB端口 * 如有多个显示器,请先拔掉其他显示器接口,将本LCD作为唯一显示器进行测试 == <font color="blue">如何旋转显示和触摸 </font>== # [http://www.lcdwiki.com/res/Show_Direction_and_Touch/如何修改显示方向和触摸-HDMI-电容触摸-V1.2.pdf 如何修改显示方向和触摸-HDMI-电容触摸-V1.2] == <font color="blue">资源下载</font> == *'''文档''' #[http://www.lcdwiki.com/res/MPI7002/7inch_HDMI_Display-C_用户手册(CN).pdf 7inch_HDMI_Display-C_用户手册] # [http://www.lcdwiki.com/res/PublicFile/%E5%A6%82%E4%BD%95%E5%AE%89%E8%A3%85LCD%E9%A9%B1%E5%8A%A8-V1.2.pdf 如何安装LCD驱动-V1.2] # [http://www.lcdwiki.com/res/Show_Direction_and_Touch/如何修改显示方向和触摸-HDMI-电容触摸-V1.2.pdf 如何修改显示方向和触摸-HDMI-电容触摸-V1.2] # [http://www.lcdwiki.com/res/PublicFile/如何安装虚拟键盘(CN).pdf 如何安装虚拟键盘(CN)] # [http://www.lcdwiki.com/res/PublicFile/树莓派入门教程(下载,格式化,烧录,SSH,PuTTy)-V1.0.pdf 树莓派入门教程(下载,格式化,烧录,SSH,PuTTy)-V1.0] #产品尺寸图:[http://www.lcdwiki.com/res/MPI7002/MPI7002_Product_Dimensions.png MPI7002_Product_Dimensions] *'''驱动下载''' #Driver:[http://www.lcdwiki.com/res/RaspDriver/LCD-show.tar.gz LCD-show.tar.gz] *'''镜像下载''' :如果你觉得前面步骤的修改配置、安装驱动都比较困难或者仍然显示异常, :请先使用我们预装好驱动的镜像,下载后解压并把镜像写入到TF卡中。然后把卡插入树莓派就可以使用了。 {| class="wikitable" border="1" style="width: 90%; margin-left:1.5%;background-color: white;" !系统名称 !系统版本 ! colspan="2" |下载地址 !支持的树莓派版本 !默认密码 |- | rowspan="2" |Raspbian | rowspan="2" |2018-10-09 |[[File:360-2.jpg|24px]]360Yun: |[https://yunpan.360.cn/surl_ymkMbGFn5qs MPI7002-1024x600-Raspbian-20181009.7z] | rowspan="2" |PI3B+/A/A+/B/B+/PI2/PI3/ZERO/ZERO W | rowspan="2" |user:pi password:raspberry |- |[[File:Mega-1.jpg|24px]]Mega: |[https://mega.nz/#!mbBw3ALT!IFkIy_hIVdW5HCe7ibJ6NvV1v3pbTAmRoXzf7FD9oWI MPI7002-1024x600-Raspbian-20181009.7z] |- | rowspan="2" |Ubuntu | rowspan="2" |Mate:16.04 |百度网盘(国内) |[https://pan.baidu.com/s/1GOOvKMA1e6NUV9xMSzKuOQ 7inch-1024X600-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z] | rowspan="2" |PI3,PI2 | rowspan="2" |user:pi password:raspberry |- |[[File:Mega-1.jpg|24px]]Mega: |[https://mega.nz/#!eCAWmaCR!40h58sVX6T656frdQBmZkiK6_biaAQgdzioKh69Rs64 7inch-1024X600-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z] |- | rowspan="2" |Kali-linux | rowspan="2" |2018.2 nexmon |百度网盘(国内) |[https://pan.baidu.com/s/1IHBqzYFzOFDK3-VP22NIxg MPI7002-1024X600-kali-linux-2018.2-rpi3-nexmon.7z] | rowspan="2" |PI3B+,PI3,PI2 | rowspan="2" |user:root password:toor |- |[[File:Mega-1.jpg|24px]]Mega: |[https://mega.nz/#!LfZQnaoJ!TYJepulkzAofMYohjGUGloVaFSFlvjVHNahq3B-2gCM 7inch-1024X600_kali-2.1.2_rpi2-rpi3.7z] |- | rowspan="2" |Win10 IOT | rowspan="2" |2017.06 |百度网盘(国内) |[https://pan.baidu.com/s/13_tWkfSudhMVRqXbuSZE6A 7inch-RPI_2B-win10IOT-1024x600.img.zip] | rowspan="2" |PI3,PI2 | rowspan="2" | |- |[[File:Mega-1.jpg|24px]]Mega: |[https://mega.nz/#!yHZ0VYyb!0XA6TW7lx8GpyAwVKbj8vXhaFERbwfLw9JNe6REJEwg 7inch-RPI2-win10IOT-1024x600.img.zip] |} *'''常用软件''' #[http://www.lcdwiki.com/res/software/Panasonic_SDFormatter.zip Panasonic SDFormatter] #[http://www.lcdwiki.com/res/software/Win32DiskImager.zip Win32DiskImager] #[http://www.lcdwiki.com/res/software/putty.zip PuTTY] |-| 常见问答=<table class="a-r at-c roundy bgd-blue bl-white" style="margin-left: 5px; margin-bottom: 5px;"> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"><table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <big><big> 问题:使用光盘/网盘提供的树莓派镜像,无法正常使用LCD,怎么处理? </big></big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>确定硬件连接无误且接触良好 </li><li>确定TF卡烧写正常,系统启动是否正常。 </li><li>树莓派正常启动时PWR灯常亮,ACT灯闪烁。 </li><li>如果发现两灯都常亮则可能是TF卡烧写镜像不成功或TF卡与树莓派接触不良。 </li><li>推荐使用5V 2A电源适配器对树莓派进行供电。 如使用电脑USB接口供电,可能由于供电不足导致树莓派无法正常启动。 </li> </ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用树莓派官方提供的镜像, LCD无显示是什么原因? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>LCD需要安装驱动才能正确显示,具体请参考”如何安装LCD驱动”相关说明文档, </li><li>建议先使用我们提供的镜像,测试通过后,再自行安装驱动程序。 </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>装好驱动后如想切换回传统显示器进行显示,如何操作? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>请参考”如何安装LCD驱动”相关说明文档,使用以下命令切换: {{code|1= sudo ./LCD-hdmi }} </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用7寸HDMI屏时显示正常但无触摸功能,如何处理? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>检查触摸排线接插处是否运输松动 </li><li>检查USB一端是否连接树莓派4个USB口中任意一个,另一端连接到液晶屏的USB Touch接口. </li><li>可先将USB触摸连接到电脑USB口,观察是否能正常被电脑识别并正常触摸,以此可以判断触摸功能好坏, </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>问题:更新升级镜像之后无法使用? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>更新需按照以下方式进行,否则可能导致镜像无法运行: <pre style="border: 1px dashed black;color:black"> sudo apt-mark hold raspberrypi-bootloader sudo apt-get update sudo apt-get upgrade </pre> </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>5寸和7寸屏连接到电脑HDMI,无法正常显示,怎么解决? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>确定电脑的HDMI接口可以正常输出 </li><li>电脑只连接LCD作为显示设备,不连接其它的显示器(拔掉其他显示器)。 </li><li>先接USB供电线再接HDMI线。 </li><li>尝试重启电脑。 </li><li>必须使用windows操作系统。 </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>在树莓派3代上,怎么打开蓝牙功能? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>方法1:升级到树莓派官方最新镜像(2016-05-27-jessie之后版本已经默认打开蓝牙功能); </li><li>方法2:手动打开蓝牙功能<br /> {{code|1= sudo apt-get install pi-bluetooth sudo apt-get install bluetooth bluez blueman systemctl status bluetooth sudo systemctl start bluetooth sudo reboot }} </li></ul> </td></tr></table> </td></tr></table> <br /> <table style="margin-top: 10px; border-right: 20px solid transparent; border-top: 20px solid #008DE6;"> <tr> <td> <table class="roundy" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #008DE6;"> <tr> <td><font color="#FFF"> <b><big><big>问题:</big></big></b></font><font color="#EEE"><big>使用5寸7寸HDMI屏时无法全屏或显示残缺,如何处理? </big></font> </td></tr></table> </td></tr></table> <table style="margin-top: 10px; border-left: 20px solid transparent; border-top: 20px solid #DDD;"> <tr> <td> <table class="roundy mw-collapsible" style="margin-top: -30px; margin-left: -5px; margin-right: -5px; background: #DDD;"> <tr> <td><font color="#008DE6"> <b><big>答复:</big></b></font><br /> </td></tr> <tr> <td> <ul><li>检查HDMI是否已经插好并且输出正常 </li><li>打开SD卡根目录下config.txt文件,检查HDMI配置是否正确 </li><li>5寸和7寸800*480应配置为如下参数:<br /> <pre style="border: 1px dashed black;color:black;width:80%"> hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 </pre> </li><li>7寸1024*600高清应配置为:<br /> <pre style="border: 1px dashed black;color:black;width:80%"> hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 </pre> </li></ul> </td></tr></table> </td></tr></table> <br /> |-| 售后= {{contact_us }} </tabber> </div>
该页面使用的模板:
模板:Code
(
查看源代码
)
模板:Lan
(
查看源代码
)
模板:Note image
(
查看源代码
)
返回至
7inch HDMI Display-C
。