MHS-3.5inch RPi Display

From LCD wiki
Revision as of 10:20, 17 January 2019 by Root (talk | contribs) (Download Resources)
Jump to: navigation, search
语言选择(Other languages): 中文 English

Product Video

Product Pictures



  • Physical resolution 320 x 480, with resistive touch control
  • It supports up to 125MHz SPI signal input, showing stable no screen and no flicker
  • With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
  • Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
  • Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+)
  • Support Raspbian/Ubuntu/Kali system, provide driver and image
  • This product has passed CE and RoHS certification

Key Parameters

LCD Interface SPI (upports up to 125MHz SPI input)
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Backlight LED
Resolution 320*480 (Pixel)
power consumption 120ma
Working temperature(℃) -20~70


1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active

Driver Installation

Step1,Install the Raspbian/UbuntuMate official mirror (Q:How to?)

(1) Download the latest Raspbian/ubuntumate mirror from official
(2) Use <SDFormatter> to format Micro SD card
(3) Use <Win32DiskImager> to burn the official image to Micro SD card

Step2,Connect with RaspberryPi


Align right-side to insert the LCD screen             
Plug-in MicroSD card, connect network and power 

Step3,Install Driver for RaspberryPi

(1)Login to raspberryPi terminal by SSH (user name: pi ,password :raspberry) (Q:How to?)
(2)Execute the following commands (raspberryPi needs to connect Internet):
sudo rm -rf LCD-show
git clone
chmod -R 755 LCD-show
cd LCD-show/
sudo ./MHS35-show
(3) After the above commands are executed, the system will automatically restart and be able to display and touch normally now.
Note: after installing this driver, the HDMI output will be disabled. If it is necessary to switch back to the HDMI display, execute:
sudo ./LCD-hdmi

Download Resources

  • Document
  1. MHS-3.5inch_QuickStart
  2. How_to_install_matchbox-keyboard
  3. How_to_calibrate_the_resistance_touch_screen-V1.2
  4. How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
  • Driver download
  • Images download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name Version Support Password Download
Raspbian 2018-11-13 PI3B+/A/A+/B/B+/PI2/


user: pi

password: raspberry

360-2.jpg360Yun: 3.5inch-MHS-Raspbian-20181113.7z
Mega-1.jpg Mega: 3.5inch-MHS-Raspbian-20181113.7z
Ubuntu Mate:16.04 PI3,PI2 user: pi

password: raspberry

360-2.jpg360Yun: MHS35-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi.7z
Mega-1.jpg Mega: MHS35-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi.7z
Kali-linux 2018.3,nexmon PI3B+,PI3,PI2 user: root

password: toor

360-2.jpg360Yun: MHS35-kali-linux-2018.3-rpi3-nexmon.7z
Mega-1.jpg Mega: MHS35-kali-linux-2018.3-rpi3-nexmon.7z
RetroPie  April 14, 2018. PI3B+,PI3,PI2 user: pi

password: raspberry

360-2.jpg360Yun: MHS35-retropie-4.4-rpi2_rpi3.7z
Mega-1.jpg Mega: MHS35-retropie-4.4-rpi2_rpi3.7z
RetroPie  April 14, 2018. Pi1/ZERO/ZERO W user: pi

password: raspberry

360-2.jpg360Yun: MHS35-retropie-4.4-rpi1_zero.7z
Mega-1.jpg Mega: MHS35-retropie-4.4-rpi1_zero.7z
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY