Difference between revisions of "HDMI display does not display after installing FBCP driver"
(→Solution) (Tag: Visual edit) |
(→Solution) |
||
(8 intermediate revisions by 2 users not shown) | |||
Line 19: | Line 19: | ||
Since the default output resolution of the driver installed in the above products is 480*320, | Since the default output resolution of the driver installed in the above products is 480*320, | ||
− | but many traditional HDMI displays do not support HDMI input signal lower than | + | but many traditional HDMI displays do not support HDMI input signal lower than 640*480, |
the HDMI display cannot display normally or even without display. | the HDMI display cannot display normally or even without display. | ||
Line 26: | Line 26: | ||
* Open the "config. txt" file in the TF root directory, | * Open the "config. txt" file in the TF root directory, | ||
− | * Find | + | * Find the line at the end of the file |
− | * Change the value of 480 320 to the | + | {{code|1= |
− | * For example: change to | + | hdmi_cvt <font color="red">480 320</font> 60 6 0 0 0 |
− | + | }} | |
+ | * Change the value of 480*320 to 640*480, 800*480 or the higher resolution (note the space), | ||
+ | * For example: change to 800*480 resolution | ||
+ | {{code|1= | ||
+ | hdmi_cvt <font color="red">800 480</font> 60 6 0 0 0 | ||
+ | }} | ||
* Save and safely pop up TF, insert raspberry pie and restart. | * Save and safely pop up TF, insert raspberry pie and restart. |
Latest revision as of 11:46, 9 July 2019
Phenomenon
For the following products:
Following the steps of the wiki page to install the driver supporting FPCP, the above display can display normally.
However, the hdmi-connected monitor displays nothing or is prompted "input not supported", etc
Analysis
Since the default output resolution of the driver installed in the above products is 480*320,
but many traditional HDMI displays do not support HDMI input signal lower than 640*480,
the HDMI display cannot display normally or even without display.
Solution
- Open the "config. txt" file in the TF root directory,
- Find the line at the end of the file
hdmi_cvt 480 320 60 6 0 0 0
- Change the value of 480*320 to 640*480, 800*480 or the higher resolution (note the space),
- For example: change to 800*480 resolution
hdmi_cvt 800 480 60 6 0 0 0
- Save and safely pop up TF, insert raspberry pie and restart.