Difference between revisions of "CH32F203C8T6 Board"

From LCD wiki
Jump to: navigation, search
(CH32F103C8T6 Minimum System Development Board)
(Product Parameters)
Line 32: Line 32:
 
|-
 
|-
 
|①
 
|①
|J1
+
|RST reset button
|Connect to the '''Common-SPI''' display module
+
|Used to reset the development board by pressing the key
 
|-
 
|-
 
|②
 
|②
|J2
+
|DL download button
|Connect to the '''Common-SPI/IPS''' display module
+
|For USB Download and serial port download, press and hold the button, and then power on the smallest system board to enter the download mode
 
|-
 
|-
 
|③
 
|③
|J3
+
|KEY0 test key
|Connect to the '''Arduino-SPI''' display module
+
|For standby wake-up or program key function design
 
|-
 
|-
 
|④
 
|④
|J4
+
|Extended IO row pin
|Connect to the '''IIC-VCC''' display module
+
|It is used to connect various peripherals to facilitate project development
 
|-
 
|-
 
|⑤
 
|⑤
|SWD
+
|Blue LED test light
|For SWD download and emulation
+
|Program running state for indication and DIY program lighting effect design
 
|-
 
|-
 
|⑥
 
|⑥
|USB interface
+
|Self recovery fuse
|Used for USB communication and power supply
+
|It is used to ensure the safety of the circuit in case of short circuit or other faults
 
|-
 
|-
 
|⑦
 
|⑦
|Reset button
+
|USB interface
|Reset development board
+
|Used for USB Download, USB communication, and power supply
 
|-
 
|-
 
|⑧
 
|⑧
|KEY0
+
|3.3V output voltage stabilizing IC
|For standby wake up or program button function design
+
|5V input, 3.3V output
 
|-
 
|-
 
|⑨
 
|⑨
|BT0/BT1
+
|Red LED power indicator
|Used to select the startup mode after the development board is reset
+
|Red LED light is used to indicate whether the development board is powered on normally
 
|-
 
|-
 
|⑩
 
|⑩
|STM32F103C8T6
+
|LCD in-line bus connector
|Main chip, main frequency: 72MHz, internal FLASH: 64KB, internal SRAM: 20KB, support RTC, interrupt, PWM, DMA and other functions
+
|Display module for in-line common-spi interface
 
|-
 
|-
 
|⑪
 
|⑪
|Power light
+
|STM32F203C8T6
|Red LED light is used to indicate whether the development board is normally powered
+
|Main chip, maximum main frequency: 144mhz, internal flash:64kb, internal sram:20kb, supporting RTC, interrupt, PWM, DMA and other functions
 
|-
 
|-
 
|⑫
 
|⑫
|LED0
+
|SWD download and debugging interface
|Blue LED light, used to indicate the running status of the program and DIY program lighting effect design
+
|For SWD download, program debugging and simulation
|-
 
|⑬,⑭
 
|IO expand
 
|It is used to connect various peripherals to facilitate project development
 
|-
 
|⑮
 
|Power stabilized IC
 
|5V in,3.3V out
 
 
|-
 
|-
|
+
|
|Self restoring fuse
+
|BT0/BT1 start select port
|Ensure the safety of the circuit in case of short circuit or other fault
+
|Used to select the startup mode and download mode after the minimum system board is reset
 
|}
 
|}
  

Revision as of 18:05, 14 July 2022


语言选择

Languages

➤中文
➤EN


CH32F203C8T6 Minimum System Development Board

Product Picture

CH3203-001.png CH3203-002.png


Product Description

  • CPU: CH32F203C8T6, the max main frequency: 144MHz, internal FLASH: 64KB, internal SRAM: 20KB
  • Small and delicate appearance, convenient for various DIY projects
  • Support USB, SWD and serial download, easy to debug
  • Support SPI interface interface display module direct insertion
  • Extended GPIO port for easy connection to various peripherals
  • Rich development resources, easy to learn, easy to get started

Product Parameters

CH3203-003.png

Serial number Name Description
RST reset button Used to reset the development board by pressing the key
DL download button For USB Download and serial port download, press and hold the button, and then power on the smallest system board to enter the download mode
KEY0 test key For standby wake-up or program key function design
Extended IO row pin It is used to connect various peripherals to facilitate project development
Blue LED test light Program running state for indication and DIY program lighting effect design
Self recovery fuse It is used to ensure the safety of the circuit in case of short circuit or other faults
USB interface Used for USB Download, USB communication, and power supply
3.3V output voltage stabilizing IC 5V input, 3.3V output
Red LED power indicator Red LED light is used to indicate whether the development board is powered on normally
LCD in-line bus connector Display module for in-line common-spi interface
STM32F203C8T6 Main chip, maximum main frequency: 144mhz, internal flash:64kb, internal sram:20kb, supporting RTC, interrupt, PWM, DMA and other functions
SWD download and debugging interface For SWD download, program debugging and simulation
BT0/BT1 start select port Used to select the startup mode and download mode after the minimum system board is reset

How to connect LCD screen

开发板STM32F103C8T6-Commom-SPI-EN.jpg 开发板STM32F103C8T6-IIC-GND-EN.jpg 开发板STM32F103C8T6-30-IPS-3-EN.jpg 开发板STM32F103C8T6-Arduino-EN.jpg 开发板STM32F103C8T6-IIC-VCC-EN.jpg

Program Download

Product Documentation

Reference Materials

Common Software


BACK TO TOP