7.0inch 16BIT Module SSD1963
Contents
Product Picture
Product Description
- 7.0-inch high-definition color screen, supporting 16bit RGB 65K color display, with rich display colors
- Support 800x480 resolution, and the display effect is very clear
- Using 16-bit parallel bus transmission with fast transfer speed
- Compatible with capacitive touch screen and resistive touch screen
- Support SPI flash
- With SD card slot, support SD card expansion
- Support three backlight control modes (always on, GPIO control, PWM control)
- Provides a rich sample program for STM32 and C51 platforms
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | 16BIT RGB 65K color |
| SKU | MRB7963 |
| Screen Size | 7.0(inch) |
| Screen Type | TFT |
| Driver IC | SSD1963 |
| Resolution | 800x480(Pixel) |
| Module Interface | 16Bit parallel interface |
| Active Area | 154.08x85.92(mm) |
| Touch Screen Type | Capacitive touch screen or Resistive touch screen |
| Touch IC | GT911 (capacitive touch), XPT2046 (resistive touch) |
| Module PCB Size | 181.00x108.00(mm) |
| Operating Temperature | -10℃~60℃ |
| Storage Temperature | -20℃~70℃ |
| Operating Voltage | 5V |
| IO Voltage | 3.3V |
| Power Consumption | TBD |
| Rough Weight(Package containing) | TBD |
Interface Definition
Note:
- A.The pins beginning with T are the relevant pins of the resistive touch screen;
- B.The pins beginning with SD are SD card related pins;
- C.Pins beginning with F are SPI flash related pins;
- D.NC/ starts with relevant pins of capacitive touch screen;
- E.The rest are LCD related pins;
- F.SPI flash is not welded. If you need to use it, please weld it yourself;
| Number | Pin Name | Pin Name |
| 1 | GND | power ground pin |
| 2 | EX_3.3V | Power input pin (connected to 3.3V), not used |
| 3 | NC | Undefined, reserved |
| 4 | RS | LCD register / data selection control pin (high level: register, low level: data) |
| 5 | WR | LCD write control pin |
| 6 | RD | LCD read control pin |
| 7~14 | DB8 ~ DB15 | LCD data bus high 8-bit pin |
| 15 | CS | LCD reset control pin( low level enable) |
| 16 | F_CS | SPI FLASH chip select control pin( low level enable) |
| 17 | REST | LCD reset control pin( low level reset) |
| 18 | 5V | Power input pin (connected to 5V) |
| 19 | LED_A | LCD backlight control pin(it needs to be used according to the selection) |
| 20 | NC/INT | There is no definition when connecting the resistance touch screen,Used as interrupt pin when connected to capacitive touch screen |
| 21~28 | DB0~DB7 | LCD data bus low 8-bit pin |
| 29 | T_CLK | Resistance touch screen SPI bus clock pin |
| 30 | T_CS | Resistive touch screen chip selection pin (low level enable) |
| 31 | T_DIN | Resistance touch screen SPI bus write data pin |
| 32 | NC/CRT | There is no definition when connecting the resistance touch screen,Used as reset pin when connected to capacitive touch screen (low level reset) |
| 33 | T_DO | Resistance touch screen SPI bus read data pin |
| 34 | T_IRQ | Resistance touch screen interrupt detection pin (active at low level) |
| 35 | SD_DO | SD card SDIO bus read data pin |
| 36 | SD_CLK | SD card SDIO bus clock pin |
| 37 | SD_DIN | SD card SDIO bus write data pin |
| 38 | SD_CS | SD card pin selection (low level enable) |
| 39 | NC/SDA | There is no definition when connecting the resistance touch screen,As IIC bus data pin when connected to capacitive touch screen |
| 40 | NC/SCL | There is no definition when connecting the resistance touch screen,Used as IIC bus clock pin when connected to capacitive touch screen |
Program Download
Product Documentation
- 7.0inch 16bit Parallel-Port Module User Manual
- 7.0 inch LCD specification
- 7.0inch 16bit Parallel-Port Module size picture
- 7.0inch 16bit Parallel-Port Module Schematic
- SSD1963 data sheet
- Resistance touch screen control IC data manual xpt2046
Reference Materials
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings
