3.5inch RPi Display

From LCD wiki
Revision as of 19:46, 17 July 2018 by Liang (talk | contribs)
Jump to: navigation, search


语言选择

Languages

➤中文
➤EN


Product pictures

MPI3501-100-1.jpg

Features

  • 320×480 resolution
  • Resistive touch control
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Size perfectly fits the Pi
  • High quality immersion gold surface plating
  • Supports Raspbian system, ubuntu system ,kali Linux system

Key Parameters

SKU MPI3501
LCD Type TFT
LCD Interface SPI
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Backlight LED
Resolution 320*240 (Pixel)
Aspect Ratio 8:5
Backlight Current TBD
Operating Temp. (℃) TBD

Interface

PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 KEY
18 KEY3 KEY
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active


Driver Installation

This LCD Module need install driver first.

Step 1:Download the Raspbian IMG

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image

If you don't know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

Wait A Few Minutes, when the system reboot ok, you can see that.

Touch screen calibration

  • This LCD can be calibrated using a program called xinput_calibrator
  • Install it with the commands:
cd LCD-show/
sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
  • Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
  • Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
  • You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
/ect/X11/xorg.conf.d/99-calibration.conf
  • Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:

Install Soft Keyboard

Resouce

If you don't have anything display after the Step:Driver installation ,you can try to used this configned IMAGEs for test.

  • IMAGE Download:

Download Resources

  • Document
  • Driver download
  1. Local download::LCD-show.tar.gz
  • Images download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name Version Support Password Download
Raspbian 2018-04-18 PI3B+/A/A+/B/B+/PI2/

PI3/ZERO/ZERO W

user:pi

password:raspberry

(addr1)Baidu Pan: 3.5SPI_RPI3B+_rasbian20180418.7z
(addr2)Mega: MPI3501-Raspbian-20180629.7z
Ubuntu Mate:16.04 PI3,PI2 user:pi

password:raspberry

(addr1)Baidu Pan: 3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z
(addr2)Mega: 3.5inch-RPI3-RPI2-ubuntu-mate-16.04-beta2.7z
Kali-linux 2018.2(nexmon) PI3B+,PI3,PI2 user:root

password:toor

(addr1)Baidu Pan: 3.5SPI-kali-linux-2018.2-rpi3B+-nexmon.7z
(addr2)Mega: 3.5SPI-kali-linux-2018.2-rpi3B+-nexmon.7z
  • Software
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY

BACK TO TOP