3.5inch RPi Display

Product Features

• 320×480 resolution
• Resistive touch control
• Supports any revision of Raspberry Pi (directly-pluggable)
• Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
• Drivers provided (works with your own Raspbian/Ubuntu directly)
• Size perfectly fits the Pi
• High quality immersion gold surface plating
• Supports Raspbian system, ubuntu system ,kali Linux system

Product Parameters

• LCD Type:TFT
• LCD Interface:SPI
• Touch Screen Type:Resistive
• Touch Screen Controller:XPT2046
• Colors:65536
• Backlight:LED
• Resolution:480*320 (Pixel)

Interface Function

800px

Usage

When users connect the Raspberry Pi to use, they need to configure the official system. Or you can also burn the configured system image directly.
Tips:Basic for Raspbian Jessie with PIXEL (2017-04-10-raspbian-jessie.img)

Step 1：Download the Raspbian IMG

https://www.raspberrypi.org/downloads/raspbian/

Step 2: Burn the system image

If you don't know how to do that,you can refer to the Raspberry Pi office tutorial

Step 3: Open terminal and Download the driver on RPI

Run:

git clone https://github.com/Elecrow-keen/Elecrow-LCD35.git

Step 4: Install driver

Run:

cd Elecrow-LCD35

sudo ./Elecrow-LCD35

Wait A Few Minutes, when the system reboot ok, you can see that.

500px

Touch screen calibration

• This LCD can be calibrated using a program called xinput_calibrator
• Install it with the commands:

cd Elecrow-LCD35

sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

• Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
• Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
• You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).

/ect/X11/xorg.conf.d/99-calibration.conf

• Save the touch parameters (may differ depending on LCD) to 99-calibration.conf, as shown in the picture:

600px

Install Soft Keyboard

• Install the reference link：https://github.com/Elecrow-keen/Elecrow-LCD5/wiki/How-to-Install-Soft-Keyboard

BACK TO TOP