2.8inch RPi Display

From LCD wiki
Revision as of 14:05, 7 September 2018 by Root (talk | contribs) (How to use with Raspbian)
Jump to: navigation, search


语言选择

Languages

➤中文
➤EN


Product pictures

MPI2801-RPi-main-8.jpgMPI2801-4.jpgMPI2801-2.8-RPi-3.jpg

Features

  • 320×240 resolution
  • Resistive touch control
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Size perfectly fits the Raspberry Pi
  • High quality immersion gold surface plating
  • Supports Raspbian system, Ubuntu system ,Kali Linux system

Key Parameters

SKU MPI2801
LCD Type TFT
LCD Interface SPI
Touch Screen Type Resistive
Touch Screen Controller XPT2046
Colors 65536
Backlight LED
Resolution 320*240 (Pixel)
Aspect Ratio 8:5
Active Area 43.2x57.6(mm)
Dimensions 51.53x76.68(mm)
Weight 25(g)

Hardware description

  • Dimensional drawing

MPI2801-size-5.jpg

  • Interface
MPI2801-RPi-90.jpg
PIN NO. SYMBOL DESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 22 NC NC
6, 9, 14, 20, 25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 KEY
18 KEY3 KEY
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS Touch Panel chip selection, low active


How to use with Raspbian

  • Step 1, Install Raspbian official image file

1) Download the latest image from the official download

https://www.raspberrypi.org/downloads/raspbian/

2) Install the system according to the official tutorial steps.

  • Step 2, Install the driver for the LCD

1) Connect the 2.8inch RPi Display with the Raspberry Pi and plug it in
MPI2801-RPi-34.jpg

2) Log into the command line interface for Raspberry Pi(Initial user name: pi, Password: raspberry), Get the latest drive from GitHub (the raspberry pie needs to connect to the Internet), Execute the following commands:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD28-show

After execution, the system will be restarted. If the display and touch are normal, the installation is successful.

Download Resources

  • Document
  1. 2.8inch_RPi_Display _V1.0
  2. How_to_install_the_LCD_driver_V1.2
  3. How_to_install_matchbox-keyboard
  4. How_to_calibrate_the_resistance_touch_screen-V1.2
  5. How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
  • Driver download
download:LCD-show.tar.gz
  • Images download
If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
Please Try our Configned images for tested.
Just need download and write the image into the SD card. DO NOT need any driver installation steps.
Image Name Version Support Password Download
Raspbian 2018-06-29 PI3B+/A/A+/B/B+/PI2/

PI3/ZERO/ZERO W

user:pi

password:raspberry

(addr1)Baidu Pan: 2.4-2.8-3.2inch-Raspbian-20180629.7z
(addr2)Mega: 2.4-2.8-3.2inch-Raspbian-20180629.7z
Ubuntu Mate:16.04 PI3,PI2 user:pi

password:raspberry

(addr1)Baidu Pan: 2.4-2.8-3.2inch-RPI3-RPI2-ubuntu-mate-16.04-beta2
(addr2)Mega: 2.4-2.8-3.2inch-RPI3-RPI2-ubuntu-mate-16.04-beta2
Kali-linux 2018.2(nexmon) PI3B+,PI3,PI2 user:root

password:toor

(addr1)Baidu Pan:
(addr2)Mega:
  • Software
  1. Panasonic SDFormatter
  2. Win32DiskImager
  3. PuTTY

BACK TO TOP