Difference between revisions of "2.8inch 16BIT Module R61509V SKU:MRB2802"

From LCD wiki
Jump to: navigation, search
(Interface Definition)
(Product Parameters)
(13 intermediate revisions by 2 users not shown)
Line 5: Line 5:
 
en=http://www.lcdwiki.com/2.8inch_16BIT_Module_R61509V_SKU:MRB2802
 
en=http://www.lcdwiki.com/2.8inch_16BIT_Module_R61509V_SKU:MRB2802
 
}}  
 
}}  
 
== <font color="blue">Product Video</font> ==
 
 
  
 
== <font color="blue">Product Picture</font> ==
 
== <font color="blue">Product Picture</font> ==
Line 16: Line 13:
 
* 2.8-inch color screen, support 16BIT RGB 65K color display, display rich colors
 
* 2.8-inch color screen, support 16BIT RGB 65K color display, display rich colors
 
* 240x400 resolution for clear display   
 
* 240x400 resolution for clear display   
* 16-bit parallel bus transmission for fast transfer speed
+
* Support 8-bit/16-bit parallel bus switching (the default is 16-bit), fast transfer speed
 
* Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
 
* Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
 
* Support SD card function expansion
 
* Support SD card function expansion
Line 37: Line 34:
 
| align="center" |2.8(inch)
 
| align="center" |2.8(inch)
 
|-
 
|-
| align="center" |Type
+
| align="center" |Screen Type
 
| align="center" |TFT
 
| align="center" |TFT
 
|-
 
|-
Line 47: Line 44:
 
|-
 
|-
 
| align="center" |Module Interface
 
| align="center" |Module Interface
| align="center" |16Bit parallel interface
+
| align="center" |8Bit or 16Bit parallel interface
 
|-
 
|-
 
| align="center" |Active Area 
 
| align="center" |Active Area 
| align="center" |36.00x60.00 (mm)
+
| align="center" |36.72x61.20 (mm)
 +
|-
 +
| align="center" |Touch Screen Type
 +
| align="center" |no touch screen
 +
|-
 +
| align="center" |Touch IC
 +
| align="center" |no touch IC
 
|-
 
|-
 
| align="center" |Module PCB Size
 
| align="center" |Module PCB Size
| align="center" |43.48x85.75 (mm)
+
| align="center" |43.64x85.74 (mm)
 
|-
 
|-
 
| align="center" |Operating Temperature  
 
| align="center" |Operating Temperature  
| align="center" | -30℃~70℃
+
| align="center" | -20℃~60℃
 
|-
 
|-
 
| align="center" |Storage Temperature
 
| align="center" |Storage Temperature
| align="center" | -20℃~70℃
+
| align="center" | -30℃~70℃
 
|-
 
|-
 
| align="center" |Operating Voltage
 
| align="center" |Operating Voltage
Line 67: Line 70:
 
| align="center" |TBD
 
| align="center" |TBD
 
|-
 
|-
| align="center" |Product Weight
+
| align="center" |Rough Weight(Package containing)
 
| align="center" |TBD
 
| align="center" |TBD
 
|}
 
|}
Line 73: Line 76:
 
==<font color="blue">Interface Definition</font> ==
 
==<font color="blue">Interface Definition</font> ==
  
[[File:MRB2802-005.jpg|550px]]
+
[[File:MRB2802-006.jpg|550px]]
 +
 
 +
The red box in the above figure is the 8-bit/16-bit data bus mode switch, which is described as follows:
 +
 
 +
:Soldering '''R1''': select '''16'''-bit data bus mode (default), use '''DB0~DB15''' data pin
 +
:Soldering '''R2''': select '''8'''-bit data bus mode, use '''DB8~DB15''' data pin
 +
 
 
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
 
{| class="wikitable" border="1" style="width: 550px; background-color: white;"
 
| align="center" |Number
 
| align="center" |Number
Line 101: Line 110:
 
| align="center" |6
 
| align="center" |6
 
| align="center" |DB0
 
| align="center" |DB0
| rowspan="8" |LCD data bus low 8-bit pin
+
| rowspan="8" |LCD data bus low 8-bit pin(When 8-bit parallel data bus mode is selected, the lower 8-bit data pins are not used)
 
|-
 
|-
 
| align="center" |7
 
| align="center" |7
Line 200: Line 209:
 
|-
 
|-
 
|}
 
|}
 
==<font color="blue">Product Documentation</font> ==
 
 
* [http://www.lcdwiki.com/res/MRB2408/2.4inch_16BIT_Module_MRB2408_User_Manual_CN.pdf '''2.4 inch Arduino SPI Module User Manual''']
 
* [http://www.lcdwiki.com/res/MRB2408/ '''2.4 inch Arduino SPI Module Size Picture''']
 
* [http://www.lcdwiki.com/res/MRB2408/ '''2.4 inch TFT Specifications''']
 
* [http://www.lcdwiki.com/res/MRB2408/ '''2.4 inch Arduino SPI Module Schematic''']
 
* [http://www.lcdwiki.com/res/MRB2408/ '''Driver IC ILI9341 Data sheet''']
 
 
==<font color="blue">Program Download</font> ==
 
 
# ['''Demo_C51_STC12C5A60S2_Hardware_SPI''']
 
# [ '''Demo_C51_STC12C5A60S2_Software_SPI''']
 
# [ '''Demo_C51_STC89C52RC_Software_SPI''']
 
# [ '''Demo_STM32F103RCT6_Hardware_SPI''']
 
# [ '''Demo_STM32F103RCT6_Software_SPI''']
 
# [ '''Demo_STM32F103ZET6_Hardware_SPI''']
 
# [ '''Demo_STM32F103ZET6_Software_SPI''']
 
# ['''Demo_STM32F407ZGT6_Hardware_SPI''']
 
# [ '''Demo_STM32F407ZGT6_Software_SPI''']
 
# [ '''Demo_STM32F429IGT6_Hardware_SPI''']
 
# [ '''Demo_STM32F429IGT6_Software_SPI''']
 
 
* [https://yunpan.360.cn/surl_yHcxV7RUwir '''2.4 inch 16bit Module Package(The above program is packaged with one click download)''']
 
 
==<font color="blue">Reference Materials</font> ==
 
 
* [http://www.lcdwiki.com/res/PublicFile/C51_Keil%26stc-isp_Use_Illustration_EN.pdf '''C51 Keil and stc-isp software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_EN.pdf '''STM32 keil software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/PCtoLCD2002_Use_Illustration_EN.pdf '''PCtoLCD2002 software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/Image2Lcd_Use_Illustration_EN.pdf '''Image2Lcd software use illustration''']
 
* [http://www.lcdwiki.com/Chinese_and_English_display_modulo_settings '''Chinese and English display modulo settings''']
 
  
 
==<font color="blue">How to use on STM32 development board</font> ==
 
==<font color="blue">How to use on STM32 development board</font> ==
Line 239: Line 216:
 
*'''Step 1: Download the test program'''
 
*'''Step 1: Download the test program'''
  
# Download the STM32 Mini development board IO emulation or other development board FSMC test program from the [[#Program Download|'''Program Download''']] column (only these programs support the STM32 development board in-line)
+
# Download the STM32 test program from the [[#Program Download|'''Program Download''']] column
# You can also download the standard routines that come with the punctual atomic STM32 development board
 
 
# For a description of the relevant test procedures, please refer to the test program documentation in the package
 
# For a description of the relevant test procedures, please refer to the test program documentation in the package
  
 
*'''Step 2: Connect the STM32 development board'''
 
*'''Step 2: Connect the STM32 development board'''
  
# Find the TFTLCD interface on the development board, connect the module pins and interfaces, and then plug them directly into
+
# Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),  
  
::the interface(for the connection method, please refer to the instructions of the ALIENTEK STM32 development board)
+
::and then plug them directly into the Slot
  
 
*'''Step 3: Compile and download the program to the development board'''
 
*'''Step 3: Compile and download the program to the development board'''
Line 256: Line 232:
  
 
# After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.
 
# After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.
 +
 +
==<font color="blue">Program Download</font> ==
 +
 +
* [http://www.lcdwiki.com/res/Program/Parallel_Port/2.8inch/16BIT_R61509V_MRB2802_V1.0/2.8inch_16BIT_Module_R61509V_MRB2802_V1.0.zip '''2.8inch 16bit Parallel-Port Module package''']
 +
 +
==<font color="blue">Product Documentation</font> ==
 +
 +
* [http://www.lcdwiki.com/res/MRB2802/2.8inch_16BIT_Module_MRB2802_User_Manual_EN.pdf '''2.8inch 16bit Parallel-Port Module User Manual''']
 +
* [http://www.lcdwiki.com/res/MRB2802/QD2837HD01.pdf '''2.8inch TFTLCD Specification''']
 +
* [http://www.lcdwiki.com/res/MRB2802/2.8inch_MRB2803_Size.pdf '''2.8inch 16bit Parallel-Port Module Size Picture''']
 +
* [http://www.lcdwiki.com/res/MRB2802/2.8inch_MRB2802_Schematic.pdf '''2.8inch 16bit Parallel-Port Module Schematic''']
 +
* [http://www.lcdwiki.com/res/MRB2802/Altium_Package_library.zip '''2.8inch 16bit Parallel-Port Module LCD Schematic and PCB Package Library''']
 +
* [http://www.lcdwiki.com/res/MRB2802/R61509V_data_sheet.pdf '''Driver IC R61509V Data sheet''']
 +
 +
==<font color="blue">Reference Materials</font> ==
 +
 +
* [http://www.lcdwiki.com/res/PublicFile/C51_Keil%26stc-isp_Use_Illustration_EN.pdf '''C51 Keil and stc-isp software use illustration''']
 +
* [http://www.lcdwiki.com/res/PublicFile/STM32_Keil_Use_Illustration_EN.pdf '''STM32 keil software use illustration''']
 +
* [http://www.lcdwiki.com/res/PublicFile/PCtoLCD2002_Use_Illustration_EN.pdf '''PCtoLCD2002 software use illustration''']
 +
* [http://www.lcdwiki.com/res/PublicFile/Image2Lcd_Use_Illustration_EN.pdf '''Image2Lcd software use illustration''']
 +
* [http://www.lcdwiki.com/Chinese_and_English_display_modulo_settings '''Chinese and English display modulo settings''']
  
 
==<font color="blue">Common Software</font> ==
 
==<font color="blue">Common Software</font> ==

Revision as of 11:26, 12 July 2019


语言选择

Languages

➤中文
➤EN


Product Picture

MRB2802-002.jpg MRB2802-004.jpg MRB2802-003.jpg

Product Description

  • 2.8-inch color screen, support 16BIT RGB 65K color display, display rich colors
  • 240x400 resolution for clear display
  • Support 8-bit/16-bit parallel bus switching (the default is 16-bit), fast transfer speed
  • Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
  • Support SD card function expansion
  • Provides a rich sample program for STM32 and C51 platforms
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color 16BIT RGB 65K color
SKU MRB2802
Screen Size  2.8(inch)
Screen Type TFT
Driver IC R61509V
Resolution 240*400 (Pixel)
Module Interface 8Bit or 16Bit parallel interface
Active Area  36.72x61.20 (mm)
Touch Screen Type no touch screen
Touch IC no touch IC
Module PCB Size 43.64x85.74 (mm)
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
Operating Voltage 3.3V/5V
Power Consumption TBD
Rough Weight(Package containing) TBD

Interface Definition

MRB2802-006.jpg

The red box in the above figure is the 8-bit/16-bit data bus mode switch, which is described as follows:

Soldering R1: select 16-bit data bus mode (default), use DB0~DB15 data pin
Soldering R2: select 8-bit data bus mode, use DB8~DB15 data pin
Number Pin Label Description
1 CS LCD reset control pin( low level enable)
2 RS LCD register / data selection control pin(high level: register, low level: data)
3 WR LCD write control pin
4 RD LCD read control pin 
5 RST LCD reset control pin( low level reset)
6 DB0 LCD data bus low 8-bit pin(When 8-bit parallel data bus mode is selected, the lower 8-bit data pins are not used)
7 DB1
8 DB2
9 DB3
10 DB4
11 DB5
12 DB6
13 DB7
14 DB8 LCD data bus high 8-bit pin
15 DB9
16 DB10
17 DB11
18 DB12
19 DB13
20 DB14
21 DB15
22 SDCS SD card selection control pin (used when using the SD card expansion function, this test program is not used)
23 BL LCD backlight control pin(High level light)
24 VDD Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25 VDD
26 GND Module power ground pin
27 GND
28 NC Undefined, reserved
29 MISO Touch screen SPI bus data input pin(without touch screen, not used)
30 MOSI Touch screen SPI bus data output pin(without touch screen, not used)
31 PEN Touch screen interrupt detection pin(Low level when a touch occurs)(without touch screen, not used)
32 F_CS Flash chip select control pin (used when using the Flash extension function, this test program is not used)
33 T_CS Touch screen IC chip select control pin(Low level enable)(without touch screen, not used)
34 CLK Touch screen SPI bus clock control pin(without touch screen, not used)

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

  • Step 1: Download the test program
  1. Download the STM32 test program from the Program Download column
  2. For a description of the relevant test procedures, please refer to the test program documentation in the package
  • Step 2: Connect the STM32 development board
  1. Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),
and then plug them directly into the Slot
  • Step 3: Compile and download the program to the development board
  1. Compile and download the program you need to test to the STM32 development board( Don't know how to compile and download?
  • Step 4: Observe the running of the program
  1. After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

Program Download

Product Documentation

Reference Materials

Common Software

BACK TO TOP