Difference between revisions of "2.2inch SPI Module ILI9341 SKU:MSP2202"
(→Program Download) |
|||
| Line 5: | Line 5: | ||
en=http://www.lcdwiki.com/2.2inch_SPI_Module_ILI9341_SKU:MSP2202 | en=http://www.lcdwiki.com/2.2inch_SPI_Module_ILI9341_SKU:MSP2202 | ||
}} | }} | ||
| − | |||
| − | |||
==<font color="blue">Product Picture</font> == | ==<font color="blue">Product Picture</font> == | ||
| Line 54: | Line 52: | ||
|- | |- | ||
| align="center" |Operating Temperature | | align="center" |Operating Temperature | ||
| − | | align="center" | -20℃~ | + | | align="center" | -20℃~60℃ |
|- | |- | ||
| align="center" |Storage Temperature | | align="center" |Storage Temperature | ||
| − | | align="center" | -30℃~ | + | | align="center" | -30℃~70℃ |
|- | |- | ||
| align="center" |VCC power voltage | | align="center" |VCC power voltage | ||
| Line 69: | Line 67: | ||
|- | |- | ||
| align="center" |Product Weight | | align="center" |Product Weight | ||
| − | | align="center" | | + | | align="center" |22(g) |
|} | |} | ||
Revision as of 16:27, 11 July 2019
Contents
Product Picture
Product Description
- 2.2-inch color screen,support 65K color display,display rich colors
- 320X240 resolution, clear display
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Provide a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | MSP2202 |
| Screen Size | 2.2(inch) |
| Type | TFT |
| Driver IC | ILI9341 |
| Resolution | 320*240 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 33.84x45.12(mm) |
| Module PCB Size | 40.10x67.20(mm) |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| VCC power voltage | 3.3V~5V |
| Logic IO port voltage | 3.3V(TTL) |
| Power Consumption | About 90mA |
| Product Weight | 22(g) |
Interface Definition
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RESET | LCD reset signal, low level reset |
| 5 | DC/RS | LCD register / data selection signal,
high level: register, low level: data |
| 6 | SDI/MOSI | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | Backlight control, high level lighting,
if not controlled, connect 3.3V always bright |
| 9 | SDO/MISO | SPI bus read data signal, if you do not need to the read function, you can not connect it |
Product Documentation
- 2.2 inch SPI Module User Manual
- 2.2 inch TFT Specifications
- 2.2 inch SPI Module Size Picture
- 2.2 inch SPI Module Schematic
- Driver IC ILI9341 Data sheet
Program Download
Reference Materials
- Arduino IDE software use illustration
- C51 Keil and stc-isp software use illustration
- STM32 keil software use illustration
- PCtoLCD2002 software use illustration
- Image2Lcd software use illustration
- Chinese and English display modulo settings
