Difference between revisions of "2.2inch SPI Module ILI9341 SKU:MSP2202"

From LCD wiki
Jump to: navigation, search
(Program Download)
Line 155: Line 155:
 
* [http://www.lcdwiki.com/res/PublicFile/Image2Lcd_Use_Illustration_EN.pdf '''Image2Lcd software use illustration''']
 
* [http://www.lcdwiki.com/res/PublicFile/Image2Lcd_Use_Illustration_EN.pdf '''Image2Lcd software use illustration''']
 
* [http://www.lcdwiki.com/Chinese_and_English_display_modulo_settings '''Chinese and English display modulo settings''']
 
* [http://www.lcdwiki.com/Chinese_and_English_display_modulo_settings '''Chinese and English display modulo settings''']
 +
 +
==<font color="blue">How to use on Arduino</font> ==
 +
 +
* [http://www.lcdwiki.com/zh/Run_Arduino_Demo_in_spi_model '''Module instructions for use on the Arduino''']
  
 
==<font color="blue">Common Software</font> ==
 
==<font color="blue">Common Software</font> ==

Revision as of 12:07, 30 November 2018


语言选择

Languages

➤中文
➤EN


Product Video

Product Picture

MSP2202-006.jpg MSP2202-003.jpg MSP2202-004.jpg

Product Description

  • 2.2-inch color screen,support 65K color display,display rich colors
  • 320X240 resolution, clear display
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display
  • Easy to expand the experiment with SD card slot
  • Provide a rich sample program
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support

Product Parameters

Name Parameter
Display Color RGB 65K color
SKU MSP2202
Screen Size  2.2(inch)
Type TFT
Driver IC ILI9341
Resolution 320*240 (Pixel)
Module Interface 4-wire SPI interface
Active Area (AA area) 33.84x45.12(mm)
Module PCB Size 40.10x67.20(mm)
Operating Temperature -20℃~70℃
Storage Temperature -30℃~80℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption About 90mA
Product Weight 25(g)

Interface Definition

MSP2202-007.jpg

Number Pin Label Description
1 VCC 5V/3.3V power input
2 GND Ground
3 CS LCD chip select signal, low level enable
4 RESET LCD reset signal, low level reset
5 DC/RS LCD register / data selection signal,

high level: register, low level: data

6 SDI/MOSI SPI bus write data signal
7 SCK SPI bus clock signal
8 LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

9 SDO/MISO SPI bus read data signal, if you do not need to the read function, you can not connect it

Product Documentation

Program Download

  1. Demo_Arduino_Mega2560_Hardware_SPI
  2. Demo_Arduino_Mega2560_Software_SPI
  3. Demo_Arduino_UNO_Hardware_SPI
  4. Demo_Arduino_UNO_Software_SPI
  5. Demo_C51_STC12C5A60S2_Hardware_SPI
  6. Demo_C51_STC12C5A60S2_Software_SPI
  7. Demo_C51_STC89C52RC_Software_SPI
  8. Demo_STM32F103RCT6_Hardware_SPI
  9. Demo_STM32F103RCT6_Software_SPI
  10. Demo_STM32F103ZET6_Hardware_SPI
  11. Demo_STM32F103ZET6_Software_SPI
  12. Demo_STM32F407ZGT6_Hardware_SPI
  13. Demo_STM32F407ZGT6_Software_SPI
  14. Demo_STM32F429IGT6_Hardware_SPI
  15. Demo_STM32F429IGT6_Software_SPI

Reference Materials

How to use on Arduino

Common Software

BACK TO TOP