Difference between revisions of "1.8inch SPI Module ST7735S SKU:MSP1804"

Revision as of 10:21, 14 December 2018

1.8-inch color screen,support 65K color display,display rich colors
128X160 resolution, clear display
Using the SPI serial bus, it only takes a few IOs to illuminate the display
With SD card slot for convenient function expansion
Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Number	Pin Label	Description
1	VCC	5V/3.3V power input
2	GND	Ground
3	CS	LCD chip select signal, low level enable
4	RESET	LCD reset signal, low level reset
5	DC/RS	LCD register / data selection signal, high level: register, low level: data
6	SDI/MOSI	SPI bus write data signal
7	SCK	SPI bus clock signal
8	LED	Backlight control, high level lighting, if not controlled, connect 3.3V always bright
9	SDO/MISO	SPI bus read data signal, if you do not need to the read function, you can not connect it

Number	Pin Label	Description
1	RST	LCD reset signal, low level reset
2	CS	LCD chip select signal, low level enable
3	D/C	LCD register / data selection signal, high level: register, low level: data
4	DIN	LCD SPI bus write data signal
5	CLK	LCD SPI bus clock signal
6	VCC	LCD Power positive (3.3V~5V)
7	BL	Backlight control, high level lighting, if not controlled, connect 3.3V always bright
8	GND	LCD Power ground

2.2 inch SPI Module Package(The above program is packaged with one click download)

@@ Line 123: / Line 123: @@
 {| class="wikitable" border="1" style="width: 550px; background-color: white;"
-|序号
+|Number
-| align="center" |引脚标号
+| align="center" |Pin Label
-| align="center" |说明
+| align="center" |Description
 |-
 | align="center" |1
 | align="center" |RST
-|液晶屏复位信号，低电平复位
+|LCD reset signal, low level reset
 |-
 | align="center" |2
 | align="center" |CS
-|液晶屏片选信号，低电平使能
+|LCD chip select signal, low level enable
 |-
 | align="center" |3
 | align="center" |D/C
-|液晶屏寄存器/数据选择信号，低电平：寄存器，高电平：数据
+|LCD register / data selection signal,
+high level: register, low level: data
 |-
 | align="center" |4
 | align="center" |DIN
-|液晶屏SPI总线写数据信号
+|LCD SPI bus write data signal
 |-
 | align="center" |5
 | align="center" |CLK
-|液晶屏SPI总线时钟信号
+|LCD SPI bus clock signal
 |-
 | align="center" |6
 | align="center" |VCC
-|液晶屏电源正(3.3V~5V)
+|LCD Power positive (3.3V~5V)
 |-
 | align="center" |7
 | align="center" |BL
-|背光控制，高电平点亮，如无需控制则接3.3V常亮
+|Backlight control, high level lighting,
+if not controlled, connect 3.3V always bright
 |-
 | align="center" |8
 | align="center" |GND
-|液晶屏电源地
+|LCD Power ground
 |-
 |}