1.3inch SPI OLED Module SH1106 SKU:MSP130X

Product Picture

1.3-inch OLED, high resolution: 128X64 (same resolution as 12864, high PPI)
Super large viewing angle: greater than 160 °(the screen with the largest viewing angle in the display screen)
Ultra low power consumption: normal display 0.06w (far lower than TFT display)
Wide voltage supply (3V ~ 5V), compatible with 3.3V and 5V level logic, without level conversion chip
The default SPI interface (IIC interface can be changed), only 5 IOS are needed to light up easily
The working temperature range is industrial grade (- 20 ℃ ~ 70 ℃)
Military grade process standard, long-term stable work
Provide rich routines, provide the underlying driver technical support

Name	Parameter
Display Color	white/blue
SKU	MSP130W / MSP130B
Screen Size	1.3(inch)
Screen Type	OLED
Driver IC	SH1106
Resolution	128*64 (Pixel)
Module Interface	4-wire SPI interface
Active Area	29.42x14.7(mm)
Module PCB Size	33.50x35.40(mm)
Operating Voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Power Consumption	TBD
Rough Weight(Package containing)	10(g)

Module Pin	Pin description
GND	OLED power ground
VCC	OLED power positive (3.3V~5V)
CLK	SPI bus clock signal of OLED display module
MOSI	SPI bus write data signal of OLED display module
RES	Reset control signal of OLED display module
DC	Command / data selection control signal of OLED display module
CS	Chip selection control signal of OLED display module

1.3inch SPI OLED Module Package（The above programs are packaged and downloaded with one click）