Difference between revisions of "0.96inch OLED Module (IIC-4P SKU:MC096VX)"
(→Common software description) |
(→Software description) |
||
Line 119: | Line 119: | ||
==<font color="blue">Software description</font> == | ==<font color="blue">Software description</font> == | ||
+ | This module provides testing programs for three platforms,namely, C51, STM32, and Arduino, | ||
+ | |||
+ | The test program for each platform consists of roughly three parts:Platform related code, | ||
+ | |||
+ | OLED operation related code, and IIC operation related code.With the exception of platform-related | ||
+ | |||
+ | code that varies from platform to platform, the other two parts of the code are similar in principle | ||
+ | |||
+ | and implementation, and have nothing to do with the platform used.On the same platform, | ||
+ | |||
+ | the code can be ported directly, just by modifying the relevant pin definitions to work properly. | ||
+ | |||
+ | '''C51 code description''' | ||
==<font color="blue">Using Instructions</font> == | ==<font color="blue">Using Instructions</font> == |
Revision as of 09:14, 13 June 2018
Contents
Product picture
Product description
- High resolution: 128x64 (have the same resolution as 12864, high PPI)
- Large viewing angle: greater than 160° (a screen with the largest viewing angle in the monitor)
- Ultra-low power consumption: it's 0.06w in normal condition(far less than TFT display)
- Wide voltage supply (3V~5V), 3.3V and 5V level logic compatible, no level shifter IC
- IIC interface and only requires 2 IOs to light up easily
- The range of working temperature is industrial (-20°C~70°C)
- Military-grade process standards, long-term work steadily
- Provide rich multi-platform routines and the technology support of underlying driver
- Have three color display schemes of yellow and blue,white,blue to choose from
Product parameters
name | color category | ||
display color | white | blue | Blue and yellow |
SKU | MC096VW | MC096VB | MC096VY |
size | 0.96(inch) | ||
type | OLED | ||
OLED driver chip | SSD1306 | ||
resolution | 128*64 (Pixel) | ||
Module interface | IIC,4PIN | ||
Effective display area | 21.744x10.864(mm) | ||
Module size | 27.3x27.8(mm) | ||
Field of View | >160° | ||
Working temperature | -20℃~70℃ | ||
storage temperature | -30℃~80℃ | ||
Working voltage | 3.3V / 5V | ||
power dissipation | Full on is about 25mA,Full off is about 1.5mA。 | ||
product weight | 15(g) |
Interface definition
PIN | label | Pin description |
1 | VCC | OLED positive pole of power(3.3V~5V) |
2 | GND | OLED GND of power |
3 | SCL | OLED clock signal of IIC bus |
4 | SDA | OLED data signal of IIC bus |
Product size
Product size drawing:0.96 inch OLED Product size drawing
Hardware description
Hardware schematic:QD electronic 0.96 inch OLED display module hardware schematic.pdf
IIC hardware adjustment instructions of device address to slave device:
As the picture shows,in the red rectangle,if the resistor is connected to 0x78,
it indicates that the IIC slave address is 0x78,if the resistor is connected to 0x7A,
it indicates that the IIC slave address is 0x7A.
Software description
This module provides testing programs for three platforms,namely, C51, STM32, and Arduino,
The test program for each platform consists of roughly three parts:Platform related code,
OLED operation related code, and IIC operation related code.With the exception of platform-related
code that varies from platform to platform, the other two parts of the code are similar in principle
and implementation, and have nothing to do with the platform used.On the same platform,
the code can be ported directly, just by modifying the relevant pin definitions to work properly.
C51 code description
Using Instructions
Driver download
baiduyun download:0.96 inch OLED display module data of QD electronic V1.0
Common software description
the software description is in the software package and the download address as follows:
PCtoLCD2002:PCtoLCD2002