More actions
Line 190: | Line 190: | ||
password:raspberry | password:raspberry | ||
|(addr1)Baidu Pan: | |(addr1)Baidu Pan: | ||
|[https://pan.baidu.com/s/1d7Az4n2qbd4bDMOUx9IU8w 3.2inch-Raspbian-20180629.7z] | |[https://pan.baidu.com/s/1d7Az4n2qbd4bDMOUx9IU8w 2.4-2.8-3.2inch-Raspbian-20180629.7z] | ||
|- | |- | ||
|(addr2)Mega: | |(addr2)Mega: |
Revision as of 18:11, 3 September 2018
Product pictures
Features
- 320×240 resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Size perfectly fits the Raspberry Pi
- High quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system ,Kali Linux system
Key Parameters
SKU | MPI3201 |
LCD Type | TFT |
LCD Interface | SPI |
Touch Screen Type | Resistive |
Touch Screen Controller | XPT2046 |
Colors | 65536 |
Backlight | LED |
Resolution | 320*240 (Pixel) |
Aspect Ratio | 8:5 |
Active Area | 48.6*64.8(mm) |
Dimensions | 84.91*56.54(mm) |
Weight | 120(g) |
Interface
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 22 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
12 | KEY1 | Key |
13 | RST | Reset |
15 | LCD_RS | LCD instruction control, Instruction/Data Register selection |
16 | KEY2 | KEY |
18 | KEY3 | KEY |
19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
24 | LCD_CS | LCD chip selection, low active |
26 | TP_CS | Touch Panel chip selection, low active |
How to use with Raspbian
- Step 1, Install Raspbian official image file
1) Download the latest image from the official download
https://www.raspberrypi.org/downloads/raspbian/
2) Install the system according to the official tutorial steps.
- Step 2, Install the driver for the LCD
1) Connect the 3.2inch RPi Display with the Raspberry Pi and plug it in
2) Log into the command line interface for Raspberry Pi(Initial user name: pi, Password: raspberry), Get the latest drive from GitHub (the raspberry pie needs to connect to the Internet), Execute the following commands:
sudo rm -rf LCD-show git clone https://github.com/goodtft/LCD-show.git chmod -R 755 LCD-show cd LCD-show/ sudo ./LCD32-show
After execution, the system will be restarted. If the display and touch are normal, the installation is successful.
Download Resources
- Document
- 3.2inch_RPi_Display_V1.0
- How_to_install_the_LCD_driver_V1.2
- How_to_install_matchbox-keyboard
- How_to_calibrate_the_resistance_touch_screen-V1.2
- How_to_change_display_direction-GPIO-Resistive_Touch-V1.2
- Driver download
- download:LCD-show.tar.gz
- Images download
- If you have difficulty installing the driver, or if you still can't use the display properly after installing the driver,
- Please Try our Configned images for tested.
- Just need download and write the image into the TF card. DO NOT need any driver installation steps.
Image Name | Version | Support | Password | Download | |
---|---|---|---|---|---|
Raspbian | 2018-06-29 | PI3B+/A/A+/B/B+/PI2/
PI3/ZERO/ZERO W |
user:pi
password:raspberry |
(addr1)Baidu Pan: | 2.4-2.8-3.2inch-Raspbian-20180629.7z |
(addr2)Mega: | 2.4-2.8-3.2inch-Raspbian-20180629.7z | ||||
Ubuntu | Mate:16.04 | PI3,PI2 | user:pi
password:raspberry |
(addr1)Baidu Pan: | |
(addr2)Mega: | |||||
Kali-linux | 2018.2(nexmon) | PI3B+,PI3,PI2 | user:root
password:toor |
(addr1)Baidu Pan: | |
(addr2)Mega: |
- Software